Product Description
1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry
Screw Jacks in construction
Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.
Product Parameters
|
MODEL |
|
SWL2.5 |
SWL5 |
SWL10 |
SWL15 |
SWL20 |
SWL25 |
SWL35 |
|
Maximum lifting force (kN) |
|
25 |
50 |
100 |
150 |
200 |
250 |
350 |
|
Screw thread size |
|
Tr30*6 |
Tr40*7 |
Tr58*12 |
Tr58*12 |
Tr65*12 |
Tr90*16 |
Tr100*20 |
|
Maximum tension (kN) |
|
25 |
50 |
99 |
166 |
250 |
350 |
|
|
Worm gear ratio (mm) |
P |
1/6 |
1/8 |
3/23 |
1/8 |
3/32 |
3/32 |
|
|
|
M |
1/24 |
1/24 |
1/24 |
1/24 |
1/32 |
1/32 |
|
|
Worm non rotating stroke (mm) |
P |
1.0 |
0.875 |
1.565 |
1.56 |
1.5 |
1.875 |
|
|
M |
0.250 |
0.292 |
0.5 |
0.5 |
0.5 |
0.625 |
||
|
Maximum elongation of screw rod under tensile load (mm) |
|
1500 |
2000 |
2500 |
3000 |
3500 |
4000 |
|
|
Maximum lifting height at maximum pressure load (mm) |
The head of the screw rod is not guided |
250 |
385 |
500 |
400 |
490 |
850 |
820 |
|
Lead screw head guide |
400 |
770 |
1000 |
800 |
980 |
1700 |
1640 |
|
|
Worm torque at full load(N.m) |
P |
18 |
39.5 |
119 |
179 |
240 |
366 |
464 |
|
M |
8.86 |
19.8 |
60 |
90 |
122 |
217 |
253 |
|
|
efficiency(%) |
P |
22 |
23 |
20.5 |
|
19.5 |
16 |
18 |
|
M |
11 |
11.5 |
13 |
|
12.8 |
9 |
11 |
|
|
Weight without stroke(kg) |
|
7.3 |
16.2 |
25 |
|
36 |
70.5 |
87 |
|
Weight of screw rod per 100mm(kg) |
|
0.45 |
0.82 |
1.67 |
|
2.15 |
4.15 |
5.20 |
Detailed Photos
SWL Series worm screw Jack:
1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation
3.Self-locking function in the static state.
|
1. screw rod |
2. nut bolt |
3. cover |
4.Skeleton oil seal |
5.Bearing |
|
6.Worm gear |
7.Oil filling hole |
8.Case |
9.Skeleton oil seal |
10.Cover |
|
11. nut bolt |
12.Bearing |
13.Skeleton oil seal |
14.Bearing |
15.worm |
|
16.Flat key |
17.Bearing |
18.Skeleton oil seal |
19.Cover |
20.Nut bolt |
Product Description
Related Products
Packaging & Shipping
Company Profile
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
How do electronic or computer-controlled components integrate with worm wheels in modern applications?
In modern applications, electronic or computer-controlled components play a vital role in integrating with worm wheels. Here’s a detailed explanation of how these components integrate:
- Sensor Feedback: Electronic sensors can be integrated with worm wheels to provide feedback on various parameters such as position, speed, torque, and temperature. These sensors can detect the rotational position of the worm wheel, monitor the speed of rotation, measure the torque applied, and monitor the temperature of the system. The sensor data can be processed by a computer-controlled system to optimize performance, ensure safety, and enable precise control of the worm wheel system.
- Control Algorithms: Computer-controlled components allow for precise control algorithms to be implemented in worm wheel systems. These algorithms can optimize the operation of the worm wheel by adjusting parameters such as speed, torque, or position based on real-time sensor feedback. By analyzing the sensor data and applying control algorithms, the computer-controlled components can ensure efficient and accurate operation of the worm wheel system in accordance with the desired performance requirements.
- Positioning and Motion Control: Computer-controlled components can enable advanced positioning and motion control capabilities in worm wheel systems. By integrating with the worm wheel, electronic components can precisely control the position and movement of the system. This is particularly useful in applications where precise positioning or synchronized motion is required, such as robotics, CNC machines, or automated systems. The computer-controlled components receive input commands, process them, and generate appropriate signals to control the worm wheel’s rotation and positioning.
- Monitoring and Diagnostics: Electronic components can facilitate real-time monitoring and diagnostics of worm wheel systems. By continuously monitoring parameters such as temperature, vibration, or load, the computer-controlled components can detect any abnormalities or potential issues in the system. This allows for proactive maintenance or troubleshooting actions to be taken, minimizing downtime and optimizing the performance and lifespan of the worm wheel. Additionally, the computer-controlled components can generate diagnostic reports, log data, and provide visual or remote alerts for timely intervention.
- Integration with Human-Machine Interfaces: Computer-controlled components can integrate with human-machine interfaces (HMIs) to provide a user-friendly and intuitive interface for interacting with the worm wheel systems. HMIs can include touchscreens, control panels, or software applications that allow operators or users to input commands, monitor system status, adjust parameters, and receive feedback. This integration enhances the usability, flexibility, and accessibility of worm wheel systems in various applications.
- Networking and Communication: Computer-controlled components can be integrated into networked systems, allowing for communication and coordination with other devices or systems. This integration enables seamless integration of the worm wheel into larger automated systems, production lines, or interconnected machinery. Networking and communication capabilities facilitate data exchange, synchronization, and coordination, enhancing overall system performance and enabling advanced functionalities.
By integrating electronic or computer-controlled components with worm wheels, modern applications can benefit from enhanced control, precision, monitoring, and communication capabilities. These advancements enable optimized performance, improved efficiency, and increased reliability in various industries and sectors.
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
<img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L1.webp" alt="China best Swl Series Stainless Steel Worm Gear Jacks Linear Manual Car Mechanical Lift Landing Electric Reducer Worm Gear Screw Jack “><img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L2.webp" alt="China best Swl Series Stainless Steel Worm Gear Jacks Linear Manual Car Mechanical Lift Landing Electric Reducer Worm Gear Screw Jack “>
editor by Dream 2024-10-25
