Ürün Açıklaması
SMRV series worm-gear speed reducer is a new-generation of products developed by our company with combination of advanced by technology both at home and abroad.
Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
Technical data:
(1) Motor input power:0.06kw-15kw
(2) Output torque:4-2320N.M
(3) Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4) With IEC motor input flange: 56B14/71B14/80B5/90B5
Malzemeler:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-150: Cast iron housing
(3) Bearing: CHINAMFG bearing & Homemade bearing
(4) Lubricant: Synthetic & Mineral
(5) The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6) With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
Renk:
(1) Blue / Light blue
(2) Silvery White
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) Every product must be tested before sending
| Motor power | Model | speed ratio | output speed | output toruqe |
| 0.06kw 1400rpm | NMRV030 | 5 | 280rpm | 2.0N.M |
| NMRV030 | 7.5 | 186rpm | 2.6N.M | |
| NMRV030 | 10 | 140rpm | 3.3N.M | |
| NMRV030 | 15 | 94rpm | 4.7N.M | |
| NMRV030 | 20 | 70rpm | 5.9N.M | |
| NMRV030 | 25 | 56rpm | 6.8N.M | |
| NMRV030 | 30 | 47rpm | 7.9N.M | |
| NMRV030 | 40 | 35rpm | 9.7N.M | |
| NMRV030 | 50 | 28rpm | 11.0N.M | |
| NMRV030 | 60 | 24rpm | 12.0N.M | |
| NMRV030 | 80 | 18rpm | 14.0N.M | |
| 0.09kw 1400rpm | NMRV030 | 5 | 280rpm | 2.7N.M |
| NMRV030 | 7.5 | 186rpm | 3.9N.M | |
| NMRV030 | 10 | 140rpm | 5.0N.M | |
| NMRV030 | 15 | 94rpm | 7.0N.M | |
| NMRV030 | 20 | 70rpm | 8.8N.M | |
| NMRV030 | 25 | 56rpm | 10.0N.M | |
| NMRV030 | 30 | 47rpm | 12.0N.M | |
| NMRV030 | 40 | 35rpm | 14.0N.M | |
| NMRV030 | 50 | 28rpm | 17.0N.M | |
| NMRV030 | 60 | 24rpm | 18.0N.M | |
| 0.12kw 1400rpm | NMRV030 | 5 | 280rpm | 3.6N.M |
| NMRV030 | 7.5 | 186rpm | 5.2N.M | |
| NMRV030 | 10 | 140rpm | 6.6N.M | |
| NMRV030 | 15 | 94rpm | 9.3N.M | |
| NMRV030 | 20 | 70rpm | 12.0N.M | |
| NMRV030 | 25 | 56rpm | 14.0N.M | |
| NMRV030 | 30 | 47rpm | 16.0N.M | |
| NMRV030 | 40 | 35rpm | 19.0N.M | |
| NMRV030 | 50 | 28rpm | 22.0N.M | |
| 0.18kw 1400rpm | NMRV030 | 5 | 280rpm | 5.3N.M |
| NMRV030 | 7.5 | 186rpm | 7.7N.M | |
| NMRV030 | 10 | 140rpm | 10.0N.M | |
| NMRV030 | 15 | 94rpm | 14.0N.M | |
| NMRV030 | 20 | 70rpm | 18.0N.M | |
| NMRV030 | 25 | 56rpm | 20.0N.M | |
| NMRV030 | 30 | 47rpm | 24.0N.M |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Başvuru: | Sanayi |
|---|---|
| Sertlik: | Sertleştirilmiş |
| Tip: | Worm and Wormwheel |
| Output Speed: | 14-280rpm |
| Input Speed: | 1400 devir/dakika |
| Ouput Torque: | 2.6-1195n.M |
| Özelleştirme: | Mevcut |
|
|---|
Sonsuz dişli çarkların dişli sistemlerinin genel verimliliği üzerindeki etkisini açıklayabilir misiniz?
Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:
- Dişli Azaltma: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
- Doğal Verimlilik Kaybı: Sonsuz dişli çarklar, sonsuz vida ile sonsuz dişli çarkı arasında meydana gelen kayma hareketi nedeniyle doğal olarak bir miktar verimlilik kaybına neden olur. Bu kayma hareketi sürtünme yaratır ve bu da enerji kayıplarına ve ısı oluşumuna yol açar. Düz dişli çarklar veya helisel dişli çarklar gibi diğer dişli türleriyle karşılaştırıldığında, sonsuz dişli çarkların verimlilik seviyeleri genellikle daha düşüktür.
- Kendinden Kilitli Mülk: Sonsuz dişli çarkların benzersiz özelliklerinden biri de kendiliğinden kilitlenme özelliğidir. Sonsuz dişli çark aktif olarak tahrik edilmediğinde, sonsuz vida ile dişli çark arasında oluşan sürtünme, dişli çarkın geriye doğru dönmesini engeller. Bu kendiliğinden kilitlenme özelliği, stabilite sağlar ve sistemin geriye doğru hareket etmesini önler. Bununla birlikte, dişli sisteminin genel verimlilik kaybına da katkıda bulunur.
- Yağlama ve Sürtünme: Sonsuz dişli çarklarının doğru şekilde yağlanması, sürtünmeyi azaltmak ve verimliliklerini artırmak için çok önemlidir. Yağlama, sonsuz dişli ile sonsuz dişli çarkı arasında ince bir film oluşturarak doğrudan metal-metal temasını azaltır ve sürtünme kayıplarını en aza indirir. Yetersiz veya yanlış yağlama, sürtünmenin artmasına, daha yüksek enerji kayıplarına ve verimliliğin azalmasına yol açabilir. Bu nedenle, sonsuz dişli sistemlerinin verimliliğini optimize etmek için uygun yağlama seviyelerinin korunması şarttır.
- Tasarım Faktörleri: Sonsuz dişli çarkların verimliliğini etkileyebilecek çeşitli tasarım faktörleri vardır. Bunlar arasında diş profili, helis açısı, malzeme seçimi ve üretim toleransları yer alır. Diş profili ve helis açısı, temas düzenini ve yük dağılımını etkileyerek verimliliği etkileyebilir. Düşük sürtünme katsayısına ve iyi aşınma direncine sahip malzemelerin seçimi verimliliği artırmaya yardımcı olabilir. Ek olarak, sıkı üretim toleranslarının korunması, doğru dişli geçişini sağlar ve yanlış hizalama veya boşluktan kaynaklanan enerji kayıplarını azaltır.
- Çalışma Koşulları: Uygulanan yük, hız ve sıcaklık gibi çalışma koşulları da sonsuz dişli çarkların verimliliğini etkileyebilir. Daha yüksek yükler ve hızlar, sürtünmeyi ve enerji kayıplarını artırarak verimliliği düşürebilir. Yüksek sıcaklıklar ise yağlayıcının bozulmasına, viskozitesinin artmasına ve sürtünmenin yükselmesine neden olarak verimliliği daha da olumsuz etkileyebilir. Bu nedenle, belirtilen yük ve hız sınırları içinde çalışmak ve uygun çalışma sıcaklıklarını korumak, verimliliği optimize etmek için çok önemlidir.
Özetle, sonsuz dişli çarklar, dişli sistemlerinin genel verimliliği üzerinde önemli bir etkiye sahiptir. Yüksek dişli küçültme oranları ve kendiliğinden kilitlenme özellikleri sunarken, sürtünme ve kayma hareketi nedeniyle doğal verimlilik kayıplarına da yol açarlar. Doğru yağlama, uygun tasarım hususları ve belirtilen sınırlar içinde çalışma, sonsuz dişli sistemlerinin verimliliğini en üst düzeye çıkarmak için çok önemlidir.
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Diş Profili: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Malzeme Seçimi: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Gürültü ve Titreşim Kontrolü: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
Sonsuz dişli çarkının değiştirilmesi veya bakımı gerektiğine işaret eden belirtiler nelerdir ve bunlar nasıl teşhis edilir?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Aşırı Yıpranma: Sonsuz dişli çarkındaki aşırı aşınma, görsel inceleme veya ölçümle tespit edilebilir. Aşınma belirtileri arasında dişlerde çukurlaşma, çizikler veya yüzey pürüzlülüğü bulunur. Aşınmış bir sonsuz dişli çarkı, diş profilinde bir değişiklik veya diş kalınlığında bir azalma gösterebilir. Dişli çark dişlerinin düzenli olarak incelenmesi ve ölçülmesi, aşırı aşınmayı teşhis etmeye ve değiştirme veya bakım gerekip gerekmediğini belirlemeye yardımcı olabilir.
- Anormal Ses veya Titreşim: Çalışma sırasında olağandışı gürültü veya titreşim, sonsuz dişli çarkında sorun olduğunu gösterebilir. Aşırı aşınma, yanlış hizalama veya dişli dişlerinde hasar, düzensiz dişli geçişine neden olarak gürültü veya titreşime yol açabilir. Sensörler ve teşhis araçları kullanılarak gürültü ve titreşim seviyelerinin izlenmesi ve analiz edilmesi, sorunun kaynağını teşhis etmeye ve sonsuz dişli çarkının bakımının veya değiştirilmesinin gerekli olup olmadığını belirlemeye yardımcı olabilir.
- Artan tepkiler: Geri tepme, sonsuz vidanın dişleri ile sonsuz vida çarkı arasındaki boşluğu ifade eder. Geri tepmedeki artış, aşınmayı, diş hasarını veya sonsuz vida çarkının yanlış hizalanmasını gösterebilir. Aşırı geri tepme, verimliliğin azalmasına, konum doğruluğunun düşmesine ve gürültünün artmasına neden olabilir. Geri tepme, sonsuz vida ile sonsuz vida çarkı arasındaki dönme hareketini veya boşluğunu ölçerek teşhis edilebilir. Geri tepme kabul edilebilir sınırları aşarsa, bakım veya değiştirme ihtiyacını gösterebilir.
- Verimlilik veya Performansta Azalma: Mekanik sistemin genel verimliliğinde veya performansında bir düşüş, sonsuz dişli çarkında sorunlar olduğunu gösterebilir. Verimlilikteki azalma, aşınma, yanlış hizalama veya dişli dişlerinde hasar gibi çeşitli faktörlerden kaynaklanabilir. Güç tüketimi, hız veya tork gibi temel performans göstergelerinin izlenmesi, sonsuz dişli çarkındaki sorunlara işaret edebilecek önemli değişiklikleri belirlemeye yardımcı olabilir. Verimlilik veya performans kabul edilebilir seviyelerin altına düşerse, bakım veya değiştirme gerekebilir.
- Sızıntı veya Kirlenme: Sonsuz dişli çarkının etrafında yağ sızıntısı veya kirlilik bulunması, conta arızasına veya dişli kutusunun hasar görmesine işaret edebilir. Dişli kutusunu yağ sızıntısı, kalıntı veya yabancı madde belirtileri açısından incelemek, olası sorunların teşhisine yardımcı olabilir. Sonsuz dişli çarkı yeterince yağlanmazsa veya kirleticiler mevcutsa, bu durum aşınmayı hızlandırabilir, sürtünmeyi artırabilir ve dişli ömrünü kısaltabilir. Sızıntının veya kirliliğin temel nedenini ele almak çok önemlidir ve bu, sonsuz dişli çarkı bileşenlerinin bakımını veya değiştirilmesini içerebilir.
- Düzensiz Hareket veya Konumlanma: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
editor by CX 2024-04-17