Produktbeskrivning
Produktbeskrivning
Produktbeskrivning
-R-seriens spiralformade växellåda
Produktegenskaper:
1. Hög modulär design.
2. Integrerat gjuthus, kompakt dimension, hög belastningsstöd, stabil överföring och låg ljudnivå.
3. Perfekt förebyggande av oljeläckage ger bra tätningar och kan användas inom ett brett spektrum av industrier.
4. Denna serie är speciell för mopskvarn.
5. Hög effektivitet och spara energi.
6. Spara kostnad och lågt underhåll.
Designfunktioner:
1. Kompakt struktur, modulär design
2. Storlekar för enstegs-, tvåstegs- och trestegsmodeller
3. Kan kombineras med andra typer av växellådor (såsom R-serien, K-serien, F-serien, S-serien, UDL-serien)
Produktparametrar
1 etapp
| Modeller | Utgående axeldiameter | Ingående axeldiameter | Effekt (kW) | Förhållande | Max vridmoment (Nm) |
| BRX/BRXF38 | 20mm | 16mm | 0.18~1.1 | 1.62~4.43 | 20 |
| BRX/BRXF58 | 20mm | 19 mm | 0.18~5.5 | 1.3~5.5 | 70 |
| BRX/BRXF68 | 25mm | 19 mm | 0.18~7.5 | 1.4~6.07 | 135 |
| BRX/BRXF78 | 30mm | 24mm | 1.1~11 | 1.42~8.00 | 215 |
| BRX/BRXF88 | 40mm | 28mm | 3~22 | 1.39~8.65 | 400 |
| BRX/BRXF98 | 50mm | 38 mm | 5.5~30 | 1.42~8.23 | 600 |
| BRX/BRXF108 | 60mm | 42mm | 7.5~45 | 1.44~6.63 | 830 |
| BRX/BRXF128 | 75 mm | 55mm | 7.5~90 | 1.51~6.2 | 1110 |
| BRX/BRXF158 | 90 mm | 70mm | 11~132 | 1.57~6.2 | 1680 |
2-3 Steg
| Modeller | Utgående axeldiameter | Ingående axeldiameter | Effekt (kW) | Förhållande | Max vridmoment (Nm) |
| BR/BRF18 | 20mm | – | 0.18~0.75 | 3.83~74.84 | 85 |
| BR/BRF28 | 25mm | 16mm | 0.18~3 | 3.37~135.09 | 130 |
| BR/BRF38 | 25mm | 16mm | 0.18~3 | 3.41~134.82 | 200 |
| BR/BRF48 | 30mm | 19 mm | 0.18~5.5 | 3.83~176.88 | 300 |
| BR/BRF58 | 35mm | 19 mm | 0.18~7.5 | 4.39~186.89 | 450 |
| BR/BRF68 | 35mm | 19 mm | 0.18~7.5 | 4.29~199.81 | 600 |
| BR/BRF78 | 40mm | 24mm | 0.18~11 | 5.21~195.24 | 820 |
| BR/BRF88 | 50mm | 28mm | 0.55~18.5 | 5.36~246.54 | 1550 |
| BR/BRF98 | 60mm | 38 mm | 0.55~30 | 4.49~289.6 | 3000 |
| BR/BRF108 | 70mm | 42mm | 2.2~45 | 5.06~249.16 | 4300 |
| BR/BRF138 | 90 mm | 55mm | 5.5~55 | 5.51~222.6 | 8000 |
| BR/BRF148 | 110 mm | 55mm | 11~90 | 5.00~163.31 | 13000 |
| BR/BRF168 | 120 mm | 70mm | 11~160 | 8.77~229.71 | 18000 |
Materialdatablad
| Höljets material | Grått gjutjärn |
| Höljets hårdhet | HBS163~255 |
| Växelmaterial | 20CrMnTi legerat stål |
| Ythårdhet hos kugghjul | HRC58°~62 ° |
| Kugghjulskärnans hårdhet | HRC33~48 |
| Material för ingående/utgående axel | 40Cr legerat stål |
| Hårdhet hos ingående/utgående axel | HRC32~36 |
| Bearbetningsprecision av kugghjul | noggrann slipning, 6~5 grad |
| Smörjolja | GB L-CKC220-460, Shell Omala220-460 |
| Värmebehandling | anlöpning, cementering, härdning, normalisering etc. |
| Effektivitet | 94%~96% (beroende på transmissionssteget) |
| Buller (MAX) | 60~68dB |
| Temperaturökning (MAX) | 40°C |
| Temperaturökning (olja) (MAX) | 50°C |
| Vibration | ≤20 µm |
| Glapp | ≤20Arcmin |
| Märke av lager | Kinas toppmärkeslager, HRB/LYC/ZWZ/C&U. Eller andra märken som efterfrågas, SKF, FAG, INA, NSK. |
| Märke av oljetätning | NAK — ZheJiang or other brands requested |
Detaljerade foton
Vår produktionsprocess
Vår produktlinje
Företagsprofil
Företagsprofil
Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.
Vanliga frågor
Q1: Är du handelsföretag eller tillverkare?
A: Vi är fabrik.
F2: Vilka typer av växellådor kan ni producera åt oss?
A: Vårt företags huvudprodukter: R-, S-, K-, F-serien spiralformade reducerare, RV-serien snäckväxelreducerare, H-serien parallellaxelspiralformad reducerväxel
F3: Kan du tillverka enligt en anpassad ritning?
A: Ja, vi erbjuder kundanpassad service.
F4: Kan vi köpa 1 st av varje vara för kvalitetstestning?
A: Ja, vi accepterar gärna provorder för kvalitetstestning.
F5: Vilken information ska vi ge innan vi gör en beställning?
A: a) Typ av växellåda, utväxling, ingångs- och utgångstyp, ingångsfläns, monteringsläge och motorinformation etc.
b) Färg på höljet.
c) Inköpskvantitet.
d) Andra särskilda krav.
F6: Hur lång är din leveranstid?
A: Generellt sett är det 5–10 dagar om varorna finns i lager, eller 15–20 dagar om varorna inte finns i lager.
F7: Vilka är era betalningsvillkor?
A: 30% Förskottsbetalning via T/T efter kontraktets undertecknande. 70% före leverans
Om du är intresserad av vår produkt, välkommen att kontakta oss.
Vårt team kommer att göra sitt bästa för att möta dina behov 🙂
| Ansökan: | Maskiner, marin, jordbruksmaskiner |
|---|---|
| Fungera: | Distributionskraft, ändra drivmoment, hastighetsändring, hastighetsreducering |
| Layout: | Koaxial |
| Hårdhet: | Härdad tandyta |
| Installation: | Vertikal typ |
| Steg: | Enkelsteg |
| Prover: | US$ 50/Styck 1 styck (minsta beställning) | |
|---|
| Anpassning: | Tillgänglig |
|
|---|
Worm reducer gearbox – What You Need to Know
När du köper en snäckväxel är det viktigt att ta hänsyn till enhetens funktioner och egenskaper. Det är också viktigt att ta hänsyn till dess kostnad. Vi kommer att titta på de olika typerna av snäckväxellådor och de tillämpningar de kan användas för. Detta hjälper dig att välja rätt enhet för din tillämpning.
Drag
Snäckdrev är populära i instrument som kräver snabb stopp, såsom hissar och lyftanordningar. Deras mjuka material gör att de kan absorbera stötar, vilket minskar sannolikheten för fel. De är också fördelaktiga i tunga maskiner, såsom bergkrossar. Vissa tillverkare erbjuder speciella snäckor med noll glapp och hög noggrannhetsreduktion. Snäckväxellådan har en mängd olika funktioner, inklusive en axiell stigning och en cirkulär stigning. Snäckans axiella stigning måste matcha den cirkulära stigning på det större kugghjulet. Dess gängor är vänster- eller högergängade, och dess stigningsvinkel är det avstånd en punkt på gängan färdas under ett varv av snäckan. Snäckväxellådan med reducer är allmänt tillgänglig, och kugghjulstillverkare har vanligtvis ett stort lager av dem. Eftersom snäckdrev är standardiserade är deras monteringsdimensioner i allmänhet enhetliga mellan tillverkare. Det betyder att om du väljer en, behöver du inte ändra höjden, längden eller diametern på den utgående axeln. Snäckväxelreducerare har också dimensionell konsistens. Snäckdrev är mycket effektiva. De har en hög lastkapacitet och en låg friktionskoefficient. Snäckdreven har också en exakt kuggprofil, vilket minskar hastighetsfluktuationer och möjliggör tyst drift.
Funktioner
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applikationer
Denna marknadsrapport analyserar marknaden för snäckväxellåda ur ett globalt perspektiv. Den innehåller en omfattande analys av nuvarande marknadstrender och framtida tillväxtutsikter. Den ger också information om konkurrenslandskapet och de viktigaste aktörerna i branschen. Rapporten belyser också de viktigaste faktorerna som påverkar tillväxten på marknaden för snäckväxellåda.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Kosta
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspekt
Snäckväxellådor med reducerare varierar i storlek. De har en, två eller fler gängor. Varje gänga har en stigningsvinkel. En hög utväxling har fler tänder än en låg utväxling, och en låg utväxling har färre tänder. Dessa skillnader är ett resultat av kugghjulsdriften. Storleken på snäckväxeln med reducerare bör väljas utifrån den specifika tillämpningen. Snäckväxeln med reducerare sparar utrymme och ger mer vridmoment. Agknx Gearbox har skapat en mängd olika modeller för att övervinna vanliga retardationsutmaningar, från standard till hygieniska marknader. Det överlägsna Agknx-serien med transmissioner är utformad för att lösa vanliga retardationsutmaningar och utökas för att möta behoven inom sanitetsindustrin. Diametern på snäckväxeln med reducerare är en viktig faktor. Dess diameter bör vara lika med eller något större än diametern på slipskivan eller verktyget. Detta kommer att påverka tryckvinkeln. Tryckvinkeln på en snäckväxel beror på flera faktorer, inklusive dess diameter och stigningsvinkel. Diametern på slipskivan eller verktyget har också en effekt på snäckans profil. Snäckväxel med reducerare är vanliga. Många kugghjulstillverkare har stora lager av dessa kuggväxellådor med reducerare. Eftersom kugghjul är standardiserade är även monteringsmåtten för snäckväxlar vanliga bland tillverkare. Detta gör det enkelt att välja en snäckväxel med reducerväxel för din tillämpning. Dessutom är snäckväxeln enkel att installera och underhålla.
Snäckväxel, reducerväxellåda, olja
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
redaktör av CX 2023-06-13