Productbeschrijving
1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry
Screw Jacks in construction
Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.
Productparameters
| MODEL |
| SWL2.5 | SWL5 | SWL10 | SWL15 | SWL20 | SWL25 | SWL35 |
| Maximum lifting force (kN) |
| 25 | 50 | 100 | 150 | 200 | 250 | 350 |
| Screw thread size |
| Tr30*6 | Tr40*7 | Tr58*12 | Tr58*12 | Tr65*12 | Tr90*16 | Tr100*20 |
| Maximum tension (kN) |
| 25 | 50 | 99 | 166 | 250 | 350 | |
| Worm gear ratio (mm) | P | 1/6 | 1/8 | 3/23 | 1/8 | 3/32 | 3/32 | |
|
| M | 1/24 | 1/24 | 1/24 | 1/24 | 1/32 | 1/32 | |
| Worm non rotating stroke (mm) | P | 1.0 | 0.875 | 1.565 | 1.56 | 1.5 | 1.875 | |
| M | 0.250 | 0.292 | 0.5 | 0.5 | 0.5 | 0.625 | ||
| Maximum elongation of screw rod under tensile load (mm) |
| 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | |
| Maximum lifting height at maximum pressure load (mm) | The head of the screw rod is not guided | 250 | 385 | 500 | 400 | 490 | 850 | 820 |
| Lead screw head guide | 400 | 770 | 1000 | 800 | 980 | 1700 | 1640 | |
| Worm torque at full load(N.m) | P | 18 | 39.5 | 119 | 179 | 240 | 366 | 464 |
| M | 8.86 | 19.8 | 60 | 90 | 122 | 217 | 253 | |
| efficiency(%) | P | 22 | 23 | 20.5 |
| 19.5 | 16 | 18 |
| M | 11 | 11.5 | 13 |
| 12.8 | 9 | 11 | |
| Weight without stroke(kg) |
| 7.3 | 16.2 | 25 |
| 36 | 70.5 | 87 |
| Weight of screw rod per 100mm(kg) |
| 0.45 | 0.82 | 1.67 |
| 2.15 | 4.15 | 5.20 |
Gedetailleerde foto's
SWL Series worm screw Jack:
1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation
3.Self-locking function in the static state.
| 1. screw rod | 2. nut bolt | 3. cover | 4.Skeleton oil seal | 5.Bearing |
| 6.Worm gear | 7.Oil filling hole | 8.Case | 9.Skeleton oil seal | 10.Cover |
| 11. nut bolt | 12.Bearing | 13.Skeleton oil seal | 14.Bearing | 15.worm |
| 16.Flat key | 17.Bearing | 18.Skeleton oil seal | 19.Cover | 20.Nut bolt |
Productbeschrijving
Gerelateerde producten
Verpakking en verzending
Bedrijfsprofiel
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Tandprofiel: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Materiaalkeuze: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Geluids- en trillingsbeheersing: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
Hoe integreren elektronische of computergestuurde componenten met wormwielen in moderne toepassingen?
In modern applications, electronic or computer-controlled components play a vital role in integrating with worm wheels. Here’s a detailed explanation of how these components integrate:
- Sensorfeedback: Elektronische sensoren kunnen met wormwielen worden geïntegreerd om feedback te geven over verschillende parameters zoals positie, snelheid, koppel en temperatuur. Deze sensoren kunnen de rotatiepositie van het wormwiel detecteren, de rotatiesnelheid bewaken, het toegepaste koppel meten en de temperatuur van het systeem controleren. De sensorgegevens kunnen door een computergestuurd systeem worden verwerkt om de prestaties te optimaliseren, de veiligheid te waarborgen en een nauwkeurige aansturing van het wormwielsysteem mogelijk te maken.
- Besturingsalgoritmen: Computergestuurde componenten maken het mogelijk om nauwkeurige besturingsalgoritmen te implementeren in wormwielsystemen. Deze algoritmen kunnen de werking van het wormwiel optimaliseren door parameters zoals snelheid, koppel of positie aan te passen op basis van realtime sensorfeedback. Door de sensorgegevens te analyseren en besturingsalgoritmen toe te passen, kunnen de computergestuurde componenten een efficiënte en nauwkeurige werking van het wormwielsysteem garanderen, conform de gewenste prestatie-eisen.
- Positionering en bewegingscontrole: Computer-controlled components can enable advanced positioning and motion control capabilities in worm wheel systems. By integrating with the worm wheel, electronic components can precisely control the position and movement of the system. This is particularly useful in applications where precise positioning or synchronized motion is required, such as robotics, CNC machines, or automated systems. The computer-controlled components receive input commands, process them, and generate appropriate signals to control the worm wheel’s rotation and positioning.
- Monitoring en diagnostiek: Elektronische componenten kunnen realtime monitoring en diagnose van wormwielsystemen mogelijk maken. Door continu parameters zoals temperatuur, trillingen of belasting te bewaken, kunnen de computergestuurde componenten eventuele afwijkingen of potentiële problemen in het systeem detecteren. Dit maakt proactief onderhoud en probleemoplossing mogelijk, waardoor stilstand wordt geminimaliseerd en de prestaties en levensduur van het wormwiel worden geoptimaliseerd. Bovendien kunnen de computergestuurde componenten diagnostische rapporten genereren, gegevens registreren en visuele of externe waarschuwingen geven voor tijdige interventie.
- Integratie met mens-machine-interfaces: Computergestuurde componenten kunnen worden geïntegreerd met mens-machine-interfaces (HMI's) om een gebruiksvriendelijke en intuïtieve interface te bieden voor interactie met de wormwielsystemen. HMI's kunnen bestaan uit touchscreens, bedieningspanelen of softwaretoepassingen waarmee operators of gebruikers commando's kunnen invoeren, de systeemstatus kunnen bewaken, parameters kunnen aanpassen en feedback kunnen ontvangen. Deze integratie verbetert de bruikbaarheid, flexibiliteit en toegankelijkheid van wormwielsystemen in diverse toepassingen.
- Netwerken en communicatie: Computergestuurde componenten kunnen worden geïntegreerd in netwerksystemen, waardoor communicatie en coördinatie met andere apparaten of systemen mogelijk is. Deze integratie maakt een naadloze integratie van het wormwiel in grotere geautomatiseerde systemen, productielijnen of onderling verbonden machines mogelijk. Netwerk- en communicatiemogelijkheden vergemakkelijken de gegevensuitwisseling, synchronisatie en coördinatie, waardoor de algehele systeemprestaties worden verbeterd en geavanceerde functionaliteiten mogelijk worden.
Door elektronische of computergestuurde componenten te integreren met wormwielen, kunnen moderne toepassingen profiteren van verbeterde controle, precisie, bewaking en communicatiemogelijkheden. Deze ontwikkelingen maken geoptimaliseerde prestaties, verbeterde efficiëntie en verhoogde betrouwbaarheid mogelijk in diverse industrieën en sectoren.
Welke factoren moet in overweging worden genomen bij de keuze van wormwielen voor verschillende toepassingen?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Vereist koppel: De koppelvereiste van de toepassing is een cruciale factor bij de keuze van het juiste wormwiel. Houd rekening met het maximale koppel dat het wormwiel moet overbrengen en zorg ervoor dat het gekozen wormwiel een voldoende hoog koppel heeft om de belasting aan te kunnen zonder overmatige slijtage of defecten.
- Snelheidsbereik: Het snelheidsbereik van de toepassing beïnvloedt de keuze van het wormwiel. Verschillende wormwielconfiguraties zijn geschikt voor specifieke snelheidsbereiken. Voor toepassingen met hoge snelheden kan het nodig zijn om rekening te houden met factoren zoals tandontwerp, materialen en smering om wrijving en slijtage bij hogere rotatiesnelheden te minimaliseren.
- Draagvermogen: Evalueer de verwachte belasting op het wormwiel en zorg ervoor dat het gekozen wormwiel de specifieke belasting kan weerstaan zonder vervorming of overmatige slijtage. Factoren zoals het tandprofiel, de materiaalkeuze en het aantal schroefdraden in het wormwiel dragen bij aan het draagvermogen.
- Ruimtebeperkingen: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Bedrijfsomstandigheden: Evalueer de bedrijfsomstandigheden, zoals temperatuur, luchtvochtigheid en mate van vervuiling. Sommige toepassingen vereisen wormwielen met specifieke materiaaleigenschappen om bestand te zijn tegen zware omstandigheden of corrosieve stoffen. Houd rekening met factoren zoals corrosiebestendigheid, temperatuurtolerantie en de behoefte aan extra afdichtings- of beschermingsmaatregelen.
- Efficiëntievereisten: De gewenste efficiëntie van het systeem is een belangrijke overweging. Verschillende wormwielconfiguraties en materialen hebben uiteenlopende efficiëntieniveaus. Weeg de afweging tussen efficiëntie, kosten en andere toepassingsvereisten af om een wormwiel te selecteren dat de gewenste balans biedt tussen prestatie en kosteneffectiviteit.
- Onderhoud en smering: Houd rekening met de onderhoudsvereisten en de smeerbehoeften van het wormwiel. Sommige wormwielen vereisen periodieke smering om een soepele werking te garanderen en slijtage te minimaliseren. Evalueer de bereikbaarheid van het wormwiel voor smering en de frequentie van onderhoud die de toepassing toelaat.
- Verenigbaarheid: Zorg ervoor dat het gekozen wormwiel compatibel is met andere componenten van het systeem, zoals het bijbehorende wormwiel en eventuele aandrijfelementen. Houd rekening met factoren zoals tandprofielen, steek, spelingbeheersing en het algehele systeemontwerp om een goede vertanding, uitlijning en efficiënte krachtoverbrenging te garanderen.
- Kostenoverwegingen: Overweeg ten slotte de kostenimplicaties van het gekozen wormwiel. Evalueer factoren zoals materiaalkosten, productiecomplexiteit en eventuele extra functies of aanpassingen die nodig zijn. Weeg de gewenste prestaties en kwaliteit af tegen het beschikbare budget om een wormwiel te selecteren dat aan zowel de technische als de financiële eisen voldoet.
Door deze factoren zorgvuldig te overwegen, is het mogelijk om het meest geschikte wormwiel voor een specifieke toepassing te selecteren, waardoor optimale prestaties, een lange levensduur en een efficiënte krachtoverbrenging worden gegarandeerd.
<img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L1.webp" alt="China best Swl Series Stainless Steel Worm Gear Jacks Linear Manual Car Mechanical Lift Landing Electric Reducer Worm Gear Screw Jack “><img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L2.webp" alt="China best Swl Series Stainless Steel Worm Gear Jacks Linear Manual Car Mechanical Lift Landing Electric Reducer Worm Gear Screw Jack “>
editor by Dream 2024-10-25