제품 설명
제품 설명
제품 설명
-R Series Helical gearbox
Product Features:
1.High modular design.
2.Integrated casting housing,compact dimension,high loading support, stable transmitting and low noise level.
3.Perfect oil leakage preventing makes the good sealings and can be used in wide range of industry.
4.This series is special for pug mill.
5.High efficiency and save power.
6.Save cost and low maintenance.
Design Features:
1. Compact structure, modular design
2. Single-stage, two-stage and three-stage sizes
3. Can be combined with other types of gearboxes (Such as R Series, K Series, F Series, S Series, UDL Series)
제품 매개변수
1 Stage
| Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | 비율 | Max. Torque(Nm) |
| BRX/BRXF38 | 20mm | 16mm | 0.18~1.1 | 1.62~4.43 | 20 |
| BRX/BRXF58 | 20mm | 19mm | 0.18~5.5 | 1.3~5.5 | 70 |
| BRX/BRXF68 | 25mm | 19mm | 0.18~7.5 | 1.4~6.07 | 135 |
| BRX/BRXF78 | 30mm | 24mm | 1.1~11 | 1.42~8.00 | 215 |
| BRX/BRXF88 | 40mm | 28mm | 3~22 | 1.39~8.65 | 400 |
| BRX/BRXF98 | 50mm | 38mm | 5.5~30 | 1.42~8.23 | 600 |
| BRX/BRXF108 | 60mm | 42mm | 7.5~45 | 1.44~6.63 | 830 |
| BRX/BRXF128 | 75mm | 55mm | 7.5~90 | 1.51~6.2 | 1110 |
| BRX/BRXF158 | 90mm | 70mm | 11~132 | 1.57~6.2 | 1680 |
2-3Stage
| Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | 비율 | Max. Torque(Nm) |
| BR/BRF18 | 20mm | – | 0.18~0.75 | 3.83~74.84 | 85 |
| BR/BRF28 | 25mm | 16mm | 0.18~3 | 3.37~135.09 | 130 |
| BR/BRF38 | 25mm | 16mm | 0.18~3 | 3.41~134.82 | 200 |
| BR/BRF48 | 30mm | 19mm | 0.18~5.5 | 3.83~176.88 | 300 |
| BR/BRF58 | 35mm | 19mm | 0.18~7.5 | 4.39~186.89 | 450 |
| BR/BRF68 | 35mm | 19mm | 0.18~7.5 | 4.29~199.81 | 600 |
| BR/BRF78 | 40mm | 24mm | 0.18~11 | 5.21~195.24 | 820 |
| BR/BRF88 | 50mm | 28mm | 0.55~18.5 | 5.36~246.54 | 1550 |
| BR/BRF98 | 60mm | 38mm | 0.55~30 | 4.49~289.6 | 3000 |
| BR/BRF108 | 70mm | 42mm | 2.2~45 | 5.06~249.16 | 4300 |
| BR/BRF138 | 90mm | 55mm | 5.5~55 | 5.51~222.6 | 8000 |
| BR/BRF148 | 110mm | 55mm | 11~90 | 5.00~163.31 | 13000 |
| BR/BRF168 | 120mm | 70mm | 11~160 | 8.77~229.71 | 18000 |
Materials Data Sheet
| Housing material | Grey Cast iron |
| Housing hardness | HBS163~255 |
| Gear material | 20CrMnTi alloy steel |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~48 |
| Input / Output shaft material | 40Cr alloy steel |
| Input / Output shaft hardness | HRC32~36 |
| Machining precision of gears | accurate grinding, 6~5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | tempering, cementiting, quenching, normalizing, etc. |
| 능률 | 94%~96% (depends on the transmission stage) |
| Noise (MAX) | 60~68dB |
| Temp. rise (MAX) | 40°C |
| Temp. rise (Oil)(MAX) | 50°C |
| Vibration | ≤20µm |
| Backlash | ≤20Arcmin |
| Brand of bearings | China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK. |
| Brand of oil seal | NAK — ZheJiang or other brands requested |
상세 사진
Our process of production
Our product line
회사 소개
회사 소개
Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.
자주 묻는 질문
Q1: Are you trading company or manufacturer?
A: 저희는 공장입니다.
Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box
Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂
| 애플리케이션: | Machinery, Marine, Agricultural Machinery |
|---|---|
| 기능: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| 공들여 나열한 것: | 같은 축의 |
| 경도: | 경화된 치아 표면 |
| 설치: | 세로형 |
| 단계: | 단일 단계 |
| 샘플: | US$ 50개/개 1개 (최소 주문 수량) | |
|---|
| 맞춤 설정: | 사용 가능 |
|
|---|
Worm reducer gearbox – What You Need to Know
웜 감속기를 구매할 때는 기능과 특징을 꼼꼼히 살펴보는 것이 중요합니다. 또한 가격도 중요한 고려 사항입니다. 다양한 종류의 웜 감속기와 그 적용 분야를 살펴보면서 용도에 맞는 최적의 제품을 선택해 보세요.
특징
웜 기어는 엘리베이터나 리프트처럼 빠른 정지가 필요한 기기에 널리 사용됩니다. 부드러운 재질 덕분에 충격을 흡수하여 고장 발생 가능성을 줄여줍니다. 또한 암석 분쇄기와 같은 중장비에도 적합합니다. 일부 제조업체는 백래시가 없고 고정밀 감속이 가능한 특수 웜을 제공하기도 합니다. 웜 감속 기어박스는 축 피치와 원주 피치를 비롯한 다양한 특징을 가지고 있습니다. 웜의 축 피치는 큰 기어의 원주 피치와 일치해야 합니다. 나사산은 좌나사 또는 우회사일 수 있으며, 리드 각도는 웜이 한 바퀴 회전하는 동안 나사산의 한 점이 이동하는 거리입니다. 웜 기어 감속 기어박스는 시중에서 쉽게 구할 수 있으며, 기어 제조업체는 일반적으로 많은 재고를 보유하고 있습니다. 웜 기어는 표준화되어 있기 때문에 제조업체에 따라 장착 치수가 일반적으로 동일합니다. 따라서 웜 기어를 선택하더라도 출력축의 높이, 길이 또는 직경을 변경할 필요가 없습니다. 웜 기어 감속 기어박스 또한 치수 일관성이 뛰어납니다. 웜 기어는 매우 효율적입니다. 웜 기어는 높은 하중 지지력과 낮은 마찰 계수를 가지고 있습니다. 또한 정밀한 톱니 형상 덕분에 속도 변동을 줄이고 조용한 작동이 가능합니다.
함수
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
응용 프로그램
본 시장 보고서는 글로벌 관점에서 웜 감속기 기어박스 시장을 분석합니다. 현재 시장 동향과 향후 성장 전망에 대한 종합적인 분석을 제공하며, 경쟁 환경 및 주요 업체에 대한 정보도 포함합니다. 또한, 웜 감속기 기어박스 시장 성장에 영향을 미치는 주요 요인들을 중점적으로 다룹니다.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
비용
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
측면
웜 감속 기어박스는 크기가 다양하며, 하나, 둘 또는 그 이상의 나사산을 가지고 있습니다. 각 나사산에는 리드 각도가 있습니다. 고비속 기어는 저비속 기어보다 톱니 수가 많고, 저비속 기어는 톱니 수가 적습니다. 이러한 차이는 기어비에 따른 것입니다. 웜 감속 기어박스의 크기는 특정 용도에 따라 선택해야 합니다. 웜 감속 기어박스는 공간을 절약하고 더 큰 토크를 제공합니다. Agknx Gearbox는 일반적인 감속 문제부터 위생 산업에 이르기까지 다양한 시장에서 발생하는 감속 문제를 해결하기 위해 다양한 모델을 개발했습니다. Agknx의 우수한 변속기 제품군은 일반적인 감속 문제를 해결하고 위생 산업의 요구 사항을 충족하도록 설계되었습니다. 웜 감속 기어박스의 직경은 중요한 고려 사항입니다. 직경은 연삭 휠 또는 공구의 직경과 같거나 약간 커야 합니다. 이는 압력각에 영향을 미칩니다. 웜 감속 기어박스의 압력각은 직경과 리드 각도를 포함한 여러 요인에 따라 달라집니다. 연삭 휠이나 공구의 직경 또한 웜의 형상에 영향을 미칩니다. 웜 기어 감속기는 흔히 사용되는 장치이며, 많은 기어 제조업체들이 이러한 감속기를 대량으로 생산하고 있습니다. 기어는 표준화되어 있기 때문에 웜 기어의 장착 치수 또한 제조업체마다 동일합니다. 따라서 용도에 맞는 웜 기어 감속기를 쉽게 선택할 수 있습니다. 또한 웜 기어 감속기는 설치 및 유지보수가 간편합니다.
웜 기어 감속기 기어박스 오일
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by CX 2023-06-13