समाधान विवरण
प्राथमिक संसाधन:
1)housing:aluminium alloy ADC12(measurement 571-090) die cast iron HT200(measurement one hundred ten-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat remedy make equipment floor hardness up to 56-sixty two HRC After precision grinding, carburization layer’s thickness between .3-.5mm.
3) वर्म व्हील: पहनने योग्य स्टैनम मिश्र धातु CuSn10-वन
विस्तृत तस्वीरें
Mix Alternatives:
Enter:with enter shaft, With square flange,With IEC normal input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic protect
Worm reducers are obtainable with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Computer, NMRV+UDL, NMRV+MOTORS
विस्फोट देखें:
उत्पाद पैरामीटर
| पुराना मॉडल | नए मॉडल | अनुपात | केंद्र दूरी | Electricity | डिया दर्ज करें। | आउटपुट व्यास। | आउटपुट टॉर्क | वज़न |
| आरवी571 | 7.5~100 | 25 मिमी | 0.06 किलोवाट~0.12 किलोवाट | Φ9 | Φ11 | 21 समुद्री मील | 0.7 किलोग्राम | |
| आरवी030 | आरडब्ल्यू030 | सात.5~100 | 30 मिमी | 0.06 किलोवाट~0.25 किलोवाट | Φ9(Φ11) | Φ14 | 45 समुद्री मील | 1.2 किलोग्राम |
| आरवी040 | आरडब्ल्यू040 | सात.5~एक सौ | 40 मिमी | 0.09 किलोवाट~0.55 किलोवाट | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84 समुद्री मील | दो.3 किलोग्राम |
| आरवी050 | आरडब्ल्यू050 | सात.5~100 | 50 मिमी | 0.12 किलोवाट~1.5 किलोवाट | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160 समुद्री मील | three.5kgs |
| आरवी063 | आरडब्ल्यू063 | 7.5~एक सौ | 63 मिमी | 0.18 किलोवाट~2.2 किलोवाट | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230 समुद्री मील | छह.2 किलोग्राम |
| आरवी075 | आरडब्ल्यू075 | सात.5~100 | 75 मिमी | 0.25 किलोवाट~4.0 किलोवाट | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410 समुद्री मील | 9.0 किलोग्राम |
| आरवी090 | आरडब्ल्यू090 | 7.5~100 | 90 मिमी | 0.37 किलोवाट~4.0 किलोवाट | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725 समुद्री मील | 13.0 किलोग्राम |
| आरवी110 | आरडब्ल्यू110 | सात.5~एक सौ | 110 मिमी | 0.55 किलोवाट~7.5 किलोवाट | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050 नॉटिकल मीटर | 35.0 किलोग्राम |
| आरवी130 | आरडब्ल्यू130 | 7.5~एक सौ | 130 मिमी | 0.75 किलोवाट~7.5 किलोवाट | Φ24(Φ28,Φ38) | Φ45 | 1550 नॉटिकल मीटर | अड़तालीस.0 किलोग्राम |
| आरवी150 | आरडब्ल्यू150 | सात.5~एक सौ | 150 मिमी | 2.2 किलोवाट~15 किलोवाट | Φ28(Φ38,Φ42) | Φ50 | चौरासी.0 किलोग्राम |
जीएमआरवी आउटलाइन आयाम:
| जीएमआरवी | ए | बी | सी | सी 1 | डी(एच8) | ई(एच8) | एफ | जी | जी1 | एच | एच 1 | मैं | एम | एन | हे | पी | क्यू | आर | एस | टी | नीला | β | बी | टी | वी |
| 030 | अस्सी | सत्तानवे | 54 | चौवालीस | चौदह | पचपन | 32 | 56 | 63 | 65 | 29 | 55 | 40 | सत्तावन | 30 | पचहत्तर | चौवालीस | छह.पांच | 21 | पांच.पांच | एम6*दस(एन=4) | 0° | पाँच | सोलह.तीन | 27 |
| 040 | 100 | 121.5 | 70 | साठ | अठारह(19) | 60 | 43 | 71 | अठहत्तर | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | पचपन | छह.5 | 26 | छह.5 | एम6*दस(एन=4) | 45° | छह | बीस.8(21.8) | 35 |
| 050 | एक सौ बीस | 144 | अस्सी | 70 | पच्चीस(24) | 70 | उनतालीस | 85 | बानबे | पचासी | तैंतालीस.पांच | अस्सी | 60 | चौरासी | 50 | एक सौ | चौंसठ | आठ.5 | तीस | सात | M8*बारह(n=4) | 45° | आठ | 28.3(27.3) | 40 |
| 063 | एक सौ चौवालीस | 174 | एक सौ | पचासी | 25(28) | अस्सी | सड़सठ | 103 | 112 | 95 | 53 | पंचानबे | 72 | 102 | त्रेसठ | एक सौ दस | 80 | आठ.पांच | 36 | 8 | एम8*12(एन=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | एक सौ बीस | 90 | 28(35) | पंचानबे | बहत्तर | 112 | एक सौ बीस | एक सौ पंद्रह | सत्तावन | 112.5 | 86 | 119 | 75 | एक सौ चालीस | ninety three | ग्यारह | 40 | 10 | एम8*14(एन=8) | 45° | आठ(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | एक सौ चालीस | 100 | 35(38) | एक सौ दस | चौहत्तर | 130 | 140 | एक सौ तीस | 67 | 129.5 | 103 | एक सौ पैंतीस | नब्बे | 160 | 102 | 13 | पैंतालीस | 11 | एम10*सोलह(एन=8) | 45° | 10 | 38.3(41.3) | 70 |
| एक सौ दस | 255 | 295 | 170 | 115 | बयालीस | 130 | – | एक सौ चौवालीस | एक सौ पचपन | एक सौ पैंसठ | 74 | एक सौ साठ | 127.5 | 167.5 | एक सौ दस | 200 | एक सौ पच्चीस | 14 | पचास | 14 | एम10*अठारह(एन=8) | 45° | 12 | पैंतालीस.3 | पचासी |
| एक सौ तीस | 293 | 335 | दो सौ | एक सौ बीस | 45 | 180 | – | एक सौ पचपन | एक सौ सत्तर | 215 | 81 | 179 | 146.5 | 187.5 | एक सौ तीस | 250 | एक सौ चालीस | सोलह | 60 | 15 | एम12*बीस(एन=8) | 45° | 14 | 48.8 | 100 |
| डेढ़ सौ | 340 | 400 | 240 | एक सौ पैंतालीस | 50 | एक सौ अस्सी | – | 185 | 200 | 215 | 96 | 210 | एक सौ सत्तर | 230 | डेढ़ सौ | 250 | एक सौ अस्सी | अठारह | 72.5 | अठारह | एम12*22(एन=8) | 45° | चौदह | 53.8 | 120 |
फर्म प्रोफ़ाइल
CZPT ट्रांसमिशन के बारे में:
हम हांगझोऊ प्रांत के हांगझोऊ शहर में स्थित एक पेशेवर रिड्यूसर कंपनी हैं।
Our foremost products is full assortment of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer units, UDL Variators and AC Motors, G3 helical equipment motor.
Merchandise are commonly used for applications such as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-creating, construction machinery, metallurgic mine, environmental protection engineering, and all varieties of automated strains, and assembly traces.
With fast supply, outstanding after-income support, innovative making facility, our items offer well both at house and overseas. We have exported our reducers to Southeast Asia, Jap Europe and Center East and so on.Our goal is to produce and innovate on basis of higher top quality, and develop a good popularity for reducers.
Packing details:Plastic Luggage+Cartons+Picket Cases , or on ask for
We participate Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Get Eurasia
रसद
Soon after Income Service
1. नियमित रखरखाव का समय और गारंटी:Within 1 12 months right after obtaining products.
2. अन्य सेवाएँ: Such as modeling selection information, installation guidebook, and dilemma resolution guide, etc.
अक्सर पूछे जाने वाले प्रश्न
एक प्रश्न: क्या आप खरीदार के चित्र के अनुसार बना सकते हैं?
A: Of course, we offer tailored provider for consumers appropriately. We can use customer’s nameplate for gearboxes.
दो. प्रश्न: आपकी भुगतान की शर्तें क्या हैं?
A: 30% deposit just before generation,stability T/T ahead of supply.
3.Q:Are you a trading firm or company?
A:We are a manufacurer with superior gear and knowledgeable employees.
four.Q:What is your creation potential?
ए: 8000-9000 पीसी/माह
5.Q:Cost-free sample is obtainable or not?
A:Yes, we can provide free of charge sample if client agree to pay out for the courier price
छह. प्रश्न: क्या आपके पास कोई प्रमाण पत्र है?
ए: जी हाँ, हमारे पास सीई प्रमाणपत्र और एसजीएस प्रमाणन रिपोर्ट है।
अधिक जानकारी के लिए संपर्क करें:
सुश्री लिंगेल पैन
For any questions just truly feel free of charge ton get in touch with me. A lot of many thanks for your sort attention to our firm!
| / टुकड़ा | | 1 टुकड़ा (मिनीमम ऑर्डर) |
###
| आवेदन पत्र: | मोटर, मशीनरी, समुद्री, कृषि मशीनरी, उद्योग |
|---|---|
| समारोह: | वितरण शक्ति, ड्राइव टॉर्क में परिवर्तन, ड्राइव दिशा में परिवर्तन, गति परिवर्तन, गति में कमी |
| लेआउट: | समकोण |
| कठोरता: | कठोर दांत की सतह |
| स्थापना: | क्षैतिज प्रकार |
| कदम: | डबल-कदम |
###
| उदाहरण: | US$ 10/पीस 1 पीस (न्यूनतम ऑर्डर) | |
|---|
###
| अनुकूलन: | उपलब्ध | |
|---|
###
| पुराना मॉडल | नए मॉडल | अनुपात | केंद्र दूरी | शक्ति | इनपुट व्यास। | आउटपुट व्यास। | आउटपुट टॉर्क | वज़न |
| आरवी025 | 7.5~100 | 25 मिमी | 0.06 किलोवाट~0.12 किलोवाट | Φ9 | Φ11 | 21 समुद्री मील | 0.7 किलोग्राम | |
| आरवी030 | आरडब्ल्यू030 | 7.5~100 | 30 मिमी | 0.06 किलोवाट~0.25 किलोवाट | Φ9(Φ11) | Φ14 | 45 समुद्री मील | 1.2 किलोग्राम |
| आरवी040 | आरडब्ल्यू040 | 7.5~100 | 40 मिमी | 0.09 किलोवाट~0.55 किलोवाट | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84 समुद्री मील | 2.3 किलोग्राम |
| आरवी050 | आरडब्ल्यू050 | 7.5~100 | 50 मिमी | 0.12 किलोवाट~1.5 किलोवाट | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160 समुद्री मील | 3.5 किलोग्राम |
| आरवी063 | आरडब्ल्यू063 | 7.5~100 | 63 मिमी | 0.18 किलोवाट~2.2 किलोवाट | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230 समुद्री मील | 6.2 किलोग्राम |
| आरवी075 | आरडब्ल्यू075 | 7.5~100 | 75 मिमी | 0.25 किलोवाट~4.0 किलोवाट | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410 समुद्री मील | 9.0 किलोग्राम |
| आरवी090 | आरडब्ल्यू090 | 7.5~100 | 90 मिमी | 0.37 किलोवाट~4.0 किलोवाट | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725 समुद्री मील | 13.0 किलोग्राम |
| आरवी110 | आरडब्ल्यू110 | 7.5~100 | 110 मिमी | 0.55 किलोवाट~7.5 किलोवाट | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050 नॉटिकल मीटर | 35.0 किलोग्राम |
| आरवी130 | आरडब्ल्यू130 | 7.5~100 | 130 मिमी | 0.75 किलोवाट~7.5 किलोवाट | Φ24(Φ28,Φ38) | Φ45 | 1550 नॉटिकल मीटर | 48.0 किलोग्राम |
| आरवी150 | आरडब्ल्यू150 | 7.5~100 | 150 मिमी | 2.2 किलोवाट~15 किलोवाट | Φ28(Φ38,Φ42) | Φ50 | 84.0 किलोग्राम |
###
| जीएमआरवी | ए | बी | सी | सी 1 | डी(एच8) | ई(एच8) | एफ | जी | जी1 | एच | एच 1 | मैं | एम | एन | हे | पी | क्यू | आर | एस | टी | नीला | β | बी | टी | वी |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | एम6*10(एन=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | एम6*10(एन=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | एम8*12(एन=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | एम8*12(एन=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | एम8*14(एन=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | एम10*16(एन=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | एम10*18(एन=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | एम12*20(एन=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | एम12*22(एन=8) | 45° | 14 | 53.8 | 120 |
| / टुकड़ा | | 1 टुकड़ा (मिनीमम ऑर्डर) |
###
| आवेदन पत्र: | मोटर, मशीनरी, समुद्री, कृषि मशीनरी, उद्योग |
|---|---|
| समारोह: | वितरण शक्ति, ड्राइव टॉर्क में परिवर्तन, ड्राइव दिशा में परिवर्तन, गति परिवर्तन, गति में कमी |
| लेआउट: | समकोण |
| कठोरता: | कठोर दांत की सतह |
| स्थापना: | क्षैतिज प्रकार |
| कदम: | डबल-कदम |
###
| उदाहरण: | US$ 10/पीस 1 पीस (न्यूनतम ऑर्डर) | |
|---|
###
| अनुकूलन: | उपलब्ध | |
|---|
###
| पुराना मॉडल | नए मॉडल | अनुपात | केंद्र दूरी | शक्ति | इनपुट व्यास। | आउटपुट व्यास। | आउटपुट टॉर्क | वज़न |
| आरवी025 | 7.5~100 | 25 मिमी | 0.06 किलोवाट~0.12 किलोवाट | Φ9 | Φ11 | 21 समुद्री मील | 0.7 किलोग्राम | |
| आरवी030 | आरडब्ल्यू030 | 7.5~100 | 30 मिमी | 0.06 किलोवाट~0.25 किलोवाट | Φ9(Φ11) | Φ14 | 45 समुद्री मील | 1.2 किलोग्राम |
| आरवी040 | आरडब्ल्यू040 | 7.5~100 | 40 मिमी | 0.09 किलोवाट~0.55 किलोवाट | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84 समुद्री मील | 2.3 किलोग्राम |
| आरवी050 | आरडब्ल्यू050 | 7.5~100 | 50 मिमी | 0.12 किलोवाट~1.5 किलोवाट | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160 समुद्री मील | 3.5 किलोग्राम |
| आरवी063 | आरडब्ल्यू063 | 7.5~100 | 63 मिमी | 0.18 किलोवाट~2.2 किलोवाट | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230 समुद्री मील | 6.2 किलोग्राम |
| आरवी075 | आरडब्ल्यू075 | 7.5~100 | 75 मिमी | 0.25 किलोवाट~4.0 किलोवाट | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410 समुद्री मील | 9.0 किलोग्राम |
| आरवी090 | आरडब्ल्यू090 | 7.5~100 | 90 मिमी | 0.37 किलोवाट~4.0 किलोवाट | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725 समुद्री मील | 13.0 किलोग्राम |
| आरवी110 | आरडब्ल्यू110 | 7.5~100 | 110 मिमी | 0.55 किलोवाट~7.5 किलोवाट | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050 नॉटिकल मीटर | 35.0 किलोग्राम |
| आरवी130 | आरडब्ल्यू130 | 7.5~100 | 130 मिमी | 0.75 किलोवाट~7.5 किलोवाट | Φ24(Φ28,Φ38) | Φ45 | 1550 नॉटिकल मीटर | 48.0 किलोग्राम |
| आरवी150 | आरडब्ल्यू150 | 7.5~100 | 150 मिमी | 2.2 किलोवाट~15 किलोवाट | Φ28(Φ38,Φ42) | Φ50 | 84.0 किलोग्राम |
###
| जीएमआरवी | ए | बी | सी | सी 1 | डी(एच8) | ई(एच8) | एफ | जी | जी1 | एच | एच 1 | मैं | एम | एन | हे | पी | क्यू | आर | एस | टी | नीला | β | बी | टी | वी |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | एम6*10(एन=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | एम6*10(एन=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | एम8*12(एन=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | एम8*12(एन=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | एम8*14(एन=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | एम10*16(एन=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | एम10*18(एन=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | एम12*20(एन=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | एम12*22(एन=8) | 45° | 14 | 53.8 | 120 |
वर्म रिड्यूसर गियरबॉक्स खरीदते समय, यूनिट के कार्यों और विशेषताओं पर विचार करना महत्वपूर्ण है। इसकी कीमत को भी ध्यान में रखना आवश्यक है। हम विभिन्न प्रकार के वर्म रिड्यूसर गियरबॉक्स और उनके उपयोग के बारे में जानेंगे। इससे आपको अपने उपयोग के लिए सही यूनिट चुनने में मदद मिलेगी।
वर्म गियर उन उपकरणों में लोकप्रिय हैं जिन्हें तेजी से रोकने की आवश्यकता होती है, जैसे कि लिफ्ट और एलिवेटर। इनकी नरम सामग्री झटके को अवशोषित करने में सक्षम होती है, जिससे विफलता की संभावना कम हो जाती है। ये रॉक क्रशर जैसी भारी-भरकम मशीनों में भी उपयोगी होते हैं। कुछ निर्माता शून्य बैकलैश और उच्च-सटीकता वाले विशेष वर्म भी प्रदान करते हैं। वर्म रिड्यूसर गियरबॉक्स में कई विशेषताएं होती हैं, जिनमें अक्षीय पिच और वृत्ताकार पिच शामिल हैं। वर्म की अक्षीय पिच बड़े गियर की वृत्ताकार पिच से मेल खानी चाहिए। इसके धागे बाएँ या दाएँ हाथ के होते हैं, और इसका लीड कोण वह दूरी है जो धागे पर एक बिंदु वर्म के एक चक्कर के दौरान तय करता है। वर्म गियर रिड्यूसर गियरबॉक्स व्यापक रूप से उपलब्ध है, और गियर निर्माता आमतौर पर इनका बड़ा स्टॉक रखते हैं। क्योंकि वर्म गियर मानकीकृत होते हैं, इसलिए इनके माउंटिंग आयाम आमतौर पर सभी निर्माताओं में एक समान होते हैं। इसका मतलब है कि एक वर्म गियर चुनने पर आपको आउटपुट शाफ्ट की ऊँचाई, लंबाई या व्यास में बदलाव करने की आवश्यकता नहीं होगी। वर्म गियर रिड्यूसर गियरबॉक्स में आयामी स्थिरता भी होती है। वर्म गियर बहुत कुशल होते हैं। इनमें उच्च भार वहन क्षमता और कम घर्षण गुणांक होता है। वर्म गियर में दांतों का सटीक आकार भी होता है, जो गति में उतार-चढ़ाव को कम करता है और शांत संचालन सुनिश्चित करता है।
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
यह मार्केट रिपोर्ट वैश्विक परिप्रेक्ष्य से वर्म रिड्यूसर गियरबॉक्स बाजार का विश्लेषण करती है। इसमें वर्तमान बाजार रुझानों और भविष्य की विकास संभावनाओं का व्यापक विश्लेषण शामिल है। यह प्रतिस्पर्धी परिदृश्य और उद्योग के प्रमुख खिलाड़ियों के बारे में भी जानकारी प्रदान करती है। रिपोर्ट वर्म रिड्यूसर गियरबॉक्स बाजार के विकास को प्रभावित करने वाले प्रमुख कारकों पर भी प्रकाश डालती है।
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
वर्म रिड्यूसर गियरबॉक्स आकार में भिन्न होते हैं। इनमें एक, दो या अधिक थ्रेड होते हैं। प्रत्येक थ्रेड का एक लीड कोण होता है। उच्च अनुपात वाले गियरबॉक्स में निम्न अनुपात वाले गियरबॉक्स की तुलना में अधिक दांत होते हैं, और निम्न अनुपात वाले गियरबॉक्स में कम दांत होते हैं। ये अंतर गियरिंग के कारण होते हैं। वर्म गियर रिड्यूसर गियरबॉक्स का आकार विशिष्ट अनुप्रयोग के अनुसार चुना जाना चाहिए। वर्म गियर रिड्यूसर गियरबॉक्स स्थान बचाता है और अधिक टॉर्क प्रदान करता है। Agknx गियरबॉक्स ने मानक से लेकर स्वच्छता बाजारों तक, सामान्य मंदी संबंधी चुनौतियों को दूर करने के लिए विभिन्न मॉडल बनाए हैं। Agknx की बेहतर ट्रांसमिशन रेंज सामान्य मंदी संबंधी चुनौतियों को हल करने और स्वच्छता उद्योग की आवश्यकताओं को पूरा करने के लिए डिज़ाइन की गई है। वर्म रिड्यूसर गियरबॉक्स का व्यास एक महत्वपूर्ण कारक है। इसका व्यास ग्राइंडिंग व्हील या टूल के व्यास के बराबर या थोड़ा बड़ा होना चाहिए। इससे दबाव कोण प्रभावित होगा। वर्म रिड्यूसर गियरबॉक्स पर दबाव कोण कई कारकों पर निर्भर करता है, जिसमें इसका व्यास और लीड कोण शामिल हैं। ग्राइंडिंग व्हील या टूल का व्यास भी वर्म के प्रोफाइल को प्रभावित करता है। वर्म गियर रिड्यूसर गियरबॉक्स आम हैं। कई गियर निर्माताओं के पास इन गियर रिड्यूसर गियरबॉक्स का बड़ा स्टॉक होता है। गियर मानकीकृत होने के कारण, वर्म गियर के माउंटिंग आयाम भी सभी निर्माताओं में समान होते हैं। इससे आपके उपयोग के लिए वर्म गियर रिड्यूसर गियरबॉक्स का चयन करना आसान हो जाता है। इसके अलावा, वर्म गियर रिड्यूसर गियरबॉक्स को स्थापित करना और उसकी देखभाल करना भी आसान है।
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by CX 2023-03-28
Worm and Worm Wheel Pair Matching — Why Mix and Match Fails A worm and…
Worm Gear Strength Calculation — DIN 3996, ISO 14521, AGMA 6034 From application torque to…
Worm Gear Surface Finish — Why Smoothness Decides Service Life Run a fingernail across the…
Worm Gear Contact Pattern — How Bluing Tests Reveal Quality A 60 to 80 percent…
Worm Gear Module — Choosing the Right Tooth Size for Torque What module do I…
Worm Gear Center Distance — How to Calculate and Standardise One millimetre of centre distance…