उत्पाद वर्णन
विस्तृत तस्वीरें
Features of S series reducer
The same model can be equipped with motors of various powers. It is easy to realize the combination and connection between various models.
The transmission efficiency is high, and the single reducer efficiency is up to 96%. three
The transmission ratio is subdivided and the range is wide. The combined model can form a large transmission ratio and low output speed.
The installation forms are various, and can be installed with any foot, B5 flange or B4 flange. The foot mounting reducer has 2 machined foot mounting planes.
Helical gear and worm gear combination, compact structure, large reduction ratio.
Installation mode: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
Average efficiency: reduction ratio 7.5-69.39 is 77%; 70.43-288 is 62%; The S/R combination is 57%.
S57 SF57 SA57 SAF57 S series helical worm gear box speed reducer 0.18kw 0.25kw 0.37kw 0.55kw 0.75kw 1.1kw 1.5kw 2.2kw 3kw, max. permissible torque up to 300Nm, transmission ratios from 10.78 to 196.21. Mounting mode: foot mounted, flange mounted, short flange mounted, torque arm mounted. Output shaft: CZPT shaft, hollow shaft (with key, with shrink disc and with involute spline).
उत्पाद पैरामीटर
कंपनी प्रोफाइल
प्रमाणपत्र
पैकेजिंग और शिपिंग
अक्सर पूछे जाने वाले प्रश्न
| कठोरता: | कठोर दांत की सतह |
|---|---|
| स्थापना: | 90 डिग्री |
| लेआउट: | विस्तार |
| गियर का आकार: | Bevel Gear |
| कदम: | एकल-चरण |
| प्रकार: | गियर रिड्यूसर |
| उदाहरण: | US$ 100/पीस 1 पीस (न्यूनतम ऑर्डर) | |
|---|
Worm reducer gearbox – What You Need to Know
वर्म रिड्यूसर गियरबॉक्स खरीदते समय, यूनिट के कार्यों और विशेषताओं पर विचार करना महत्वपूर्ण है। इसकी कीमत को भी ध्यान में रखना आवश्यक है। हम विभिन्न प्रकार के वर्म रिड्यूसर गियरबॉक्स और उनके उपयोग के बारे में जानेंगे। इससे आपको अपने उपयोग के लिए सही यूनिट चुनने में मदद मिलेगी।
विशेषताएँ
वर्म गियर उन उपकरणों में लोकप्रिय हैं जिन्हें तेजी से रोकने की आवश्यकता होती है, जैसे कि लिफ्ट और एलिवेटर। इनकी नरम सामग्री झटके को अवशोषित करने में सक्षम होती है, जिससे विफलता की संभावना कम हो जाती है। ये रॉक क्रशर जैसी भारी-भरकम मशीनों में भी उपयोगी होते हैं। कुछ निर्माता शून्य बैकलैश और उच्च-सटीकता वाले विशेष वर्म भी प्रदान करते हैं। वर्म रिड्यूसर गियरबॉक्स में कई विशेषताएं होती हैं, जिनमें अक्षीय पिच और वृत्ताकार पिच शामिल हैं। वर्म की अक्षीय पिच बड़े गियर की वृत्ताकार पिच से मेल खानी चाहिए। इसके धागे बाएँ या दाएँ हाथ के होते हैं, और इसका लीड कोण वह दूरी है जो धागे पर एक बिंदु वर्म के एक चक्कर के दौरान तय करता है। वर्म गियर रिड्यूसर गियरबॉक्स व्यापक रूप से उपलब्ध है, और गियर निर्माता आमतौर पर इनका बड़ा स्टॉक रखते हैं। क्योंकि वर्म गियर मानकीकृत होते हैं, इसलिए इनके माउंटिंग आयाम आमतौर पर सभी निर्माताओं में एक समान होते हैं। इसका मतलब है कि एक वर्म गियर चुनने पर आपको आउटपुट शाफ्ट की ऊँचाई, लंबाई या व्यास में बदलाव करने की आवश्यकता नहीं होगी। वर्म गियर रिड्यूसर गियरबॉक्स में आयामी स्थिरता भी होती है। वर्म गियर बहुत कुशल होते हैं। इनमें उच्च भार वहन क्षमता और कम घर्षण गुणांक होता है। वर्म गियर में दांतों का सटीक आकार भी होता है, जो गति में उतार-चढ़ाव को कम करता है और शांत संचालन सुनिश्चित करता है।
कार्य
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
आवेदन
यह मार्केट रिपोर्ट वैश्विक परिप्रेक्ष्य से वर्म रिड्यूसर गियरबॉक्स बाजार का विश्लेषण करती है। इसमें वर्तमान बाजार रुझानों और भविष्य की विकास संभावनाओं का व्यापक विश्लेषण शामिल है। यह प्रतिस्पर्धी परिदृश्य और उद्योग के प्रमुख खिलाड़ियों के बारे में भी जानकारी प्रदान करती है। रिपोर्ट वर्म रिड्यूसर गियरबॉक्स बाजार के विकास को प्रभावित करने वाले प्रमुख कारकों पर भी प्रकाश डालती है।
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
लागत
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
पहलू
वर्म रिड्यूसर गियरबॉक्स आकार में भिन्न होते हैं। इनमें एक, दो या अधिक थ्रेड होते हैं। प्रत्येक थ्रेड का एक लीड कोण होता है। उच्च अनुपात वाले गियरबॉक्स में निम्न अनुपात वाले गियरबॉक्स की तुलना में अधिक दांत होते हैं, और निम्न अनुपात वाले गियरबॉक्स में कम दांत होते हैं। ये अंतर गियरिंग के कारण होते हैं। वर्म गियर रिड्यूसर गियरबॉक्स का आकार विशिष्ट अनुप्रयोग के अनुसार चुना जाना चाहिए। वर्म गियर रिड्यूसर गियरबॉक्स स्थान बचाता है और अधिक टॉर्क प्रदान करता है। Agknx गियरबॉक्स ने मानक से लेकर स्वच्छता बाजारों तक, सामान्य मंदी संबंधी चुनौतियों को दूर करने के लिए विभिन्न मॉडल बनाए हैं। Agknx की बेहतर ट्रांसमिशन रेंज सामान्य मंदी संबंधी चुनौतियों को हल करने और स्वच्छता उद्योग की आवश्यकताओं को पूरा करने के लिए डिज़ाइन की गई है। वर्म रिड्यूसर गियरबॉक्स का व्यास एक महत्वपूर्ण कारक है। इसका व्यास ग्राइंडिंग व्हील या टूल के व्यास के बराबर या थोड़ा बड़ा होना चाहिए। इससे दबाव कोण प्रभावित होगा। वर्म रिड्यूसर गियरबॉक्स पर दबाव कोण कई कारकों पर निर्भर करता है, जिसमें इसका व्यास और लीड कोण शामिल हैं। ग्राइंडिंग व्हील या टूल का व्यास भी वर्म के प्रोफाइल को प्रभावित करता है। वर्म गियर रिड्यूसर गियरबॉक्स आम हैं। कई गियर निर्माताओं के पास इन गियर रिड्यूसर गियरबॉक्स का बड़ा स्टॉक होता है। गियर मानकीकृत होने के कारण, वर्म गियर के माउंटिंग आयाम भी सभी निर्माताओं में समान होते हैं। इससे आपके उपयोग के लिए वर्म गियर रिड्यूसर गियरबॉक्स का चयन करना आसान हो जाता है। इसके अलावा, वर्म गियर रिड्यूसर गियरबॉक्स को स्थापित करना और उसकी देखभाल करना भी आसान है।
वर्म गियर रिड्यूसर गियरबॉक्स तेल
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
सीएक्स द्वारा संपादित, 2023-05-18