{"id":816,"date":"2023-06-12T00:14:50","date_gmt":"2023-06-12T00:14:50","guid":{"rendered":"https:\/\/worm-and-worm-wheel.com\/china-hot-selling-czpt-arrow-1500-rpm-motor-speed-reduce-gearbox-worm-gearbox-efficiency\/"},"modified":"2023-06-12T00:14:50","modified_gmt":"2023-06-12T00:14:50","slug":"china-hot-selling-czpt-arrow-1500-rpm-motor-speed-reduce-gearbox-worm-gearbox-efficiency","status":"publish","type":"post","link":"https:\/\/worm-and-worm-wheel.com\/et\/china-hot-selling-czpt-arrow-1500-rpm-motor-speed-reduce-gearbox-worm-gearbox-efficiency\/","title":{"rendered":"Hiina kuumm\u00fc\u00fck CZPT Arrow 1500 p\/min mootori kiirus v\u00e4hendab k\u00e4igukasti ussik\u00e4igukasti efektiivsust"},"content":{"rendered":"
\n
\n

Toote kirjeldus<\/h2>\n

\n

\u00dclevaade<\/b> <\/p>\n

Toote kirjeldus\u00a0<\/b><\/p>\n

\n

\n

Wide Selection of Gearbox Products<\/b>
The gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel shaft, vertical shaft, general box, and various parts can be changed <\/p>\n

\n

<\/p>\n

\n

\n

Eelised<\/b><\/p>\n

    \n
  • Absorption of very high torques<\/b> and axial forces<\/b><\/li>\n
  • No need for separate thrust housing & bearing<\/b>.<\/li>\n
  • Easy alignment<\/b> (screw directly fits into the vore of gear box)<\/li>\n
  • Easy to assemble & dismantle.<\/b><\/li>\n
  • Very heavy duty spherical roller thrust bearing<\/b> is provided.<\/li>\n
  • Power saving<\/b>. (you may save up to 20 % power.)<\/li>\n
  • Less requirement of space<\/b>.<\/li>\n
  • For bigger sizes water cooling<\/b> is provided\u00a0<\/li>\n
  • No maintenance required except periodic oil level checking.<\/b><\/li>\n
  • Higher productivity\u00a0<\/b><\/li>\n<\/ul>\n

    \n

    <\/p>\n

    \n

    \n

    Omadused<\/b><\/p>\n

    \u00a0<\/p>\n

      \n
    • Twin Screw Extruder Gearboxes offer the dual shaft counter rotating<\/b>. The range is available for various center distances <\/b><\/li>\n
    • The gearboxes are available with co-rotating and counter rotating variants <\/b><\/li>\n
    • To work under heavy loading force, the high level dissipation and oil lubrication system<\/b> are provided. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust <\/li>\n
    • High torque and high speed output rate <\/b><\/li>\n<\/ul>\n

      \n

      \u00a0<\/p>\n

      \n

      \n

      Processing Characteristics of Screw Shaft:<\/b><\/p>\n

      1.Suitable suggestion on material to ensure components performance and extend lifetime of products.<\/b>
      2.Professional technical team can provide surveying and mapping support.<\/b>
      3.All components are finished by CNC machine.<\/b>
      4.Sophisticated quality management system<\/b> ensure superior quality.
      \u00a0<\/p>\n

      \n

      Basic Info.<\/b>
      \u00a0<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
      Warranty: 1 year<\/td>\nWeight (KG):
      500 KG<\/td>\n<\/tr>\n
      Place of Origin:
      HangZhou, China<\/td>\n      		K\u00e4igukasti paigutus:
      helical<\/td>\n<\/tr>\n
      ratio:
      8-20<\/td>\n      		V\u00e4ljundmoment:
      2*176
      \u00a0<\/td>\n<\/tr>\n
      standard:
      JB\/T8853-2001<\/td>\n      		Certificate:
      CE<\/td>\n<\/tr>\n
      Heat treatment:
      High-frequency Hardening<\/td>\n      		T\u00f5husus:
      94%~98%(depends on the transmission stage)<\/td>\n<\/tr>\n
      Customized support:OEM ODM<\/td>\nInput\/output shaft material
      40Cr<\/td>\n<\/tr>\n
      Package:
      Wooden case
      \u00a0<\/td>\n      		Mount position:
      Flange, hollow shaft, CZPT shaft<\/td>\n<\/tr>\n
      After-sale:Online 24\/7 Installation Xihu (West Lake) Dis.<\/td>\nadvantage:
      excellent quality<\/td>\n<\/tr>\n
      Reduction radio:
      3:1
      \u00a0<\/td>\n      		Paigaldusasend:
      Horizontal Foot Mounted Vertical
      \u00a0<\/td>\n<\/tr>\n
      Sisendkiirus:
      1500
      \u00a0<\/td>\n      		V\u00e4ljundkiirus:
      500
      \u00a0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Packaging & delivery<\/b><\/p>\n\n\n\n\n
      \n

      Pakkimine:\u00a0<\/strong>wooden case packing<\/p>\n<\/td>\n

      		\u00a0<\/td>\n<\/tr>\n
      Port: <\/b>HangZhou Port<\/td>\n\u00a0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      \n

      \n

      \n

      \n

      Rakendused<\/b>
      X helical gear units for double-screw extruders with parallel drive shafts and the same direction of screw rotation are used mainly in the manufacture of granulates and the refining of raw plastics. Other areas of application include:<\/p>\n

        \n
      • Paint and lacquer industry<\/li>\n
      • Washing agent industry<\/li>\n
      • Foodstuff industry (e.g. bread, pasta)<\/li>\n
      • Animal-feed industry (dog, cat other animal food\u00a0<\/li>\n<\/ul>\n

        Maintenance of the gearbox of the dual-screw extruder<\/b>
        1. The gear box of the dual-screw extruder should be well-ventilated, and the working environment temperature should be within the range of 5-35 \u00b0C.
        2. Always check the oil quantity of the gear lubricating oil in the box to ensure that the transmission parts in the box are well lubricated.
        3. Pay attention to check the bearing parts of the box frequently. The oil temperature of the oil tank of the transmission box should not exceed 70 \u00baC during operation.
        4. The newly put into use gearbox needs to replace the lubricating oil after 250 hours of operation. The oil change time depends on the state of the oil. It is recommended to replace it after 4000-8000 hours of operation or once a year.
        5. The gearbox of the dual-screw extruder needs to be regularly maintained and inspected once a year\u00a0<\/p>\n

        Operating Process<\/b>
        1. The gear on the input shaft is driven by the motor and starts to rotate.
        2. The rotating input gear meshes with other gears inside the gearbox, transmitting power.
        3. Different-sized gears within the gearbox are combined to form a gear train. Through continuous meshing and rotation, the high-speed, low-torque power from the input shaft gradually converts into low-speed, high-torque output.
        4. The output shaft is connected to the last gear and transfers the output torque to the load.
        5. Gear reduction gearboxes typically include lubrication and cooling systems to ensure smooth operation and prevent overheating and damage.
        6. Our extruder gearbox converts high-speed, low-torque power into low-speed, high-torque output by changing the size ratios and meshing arrangements of different gears, achieving the function of speed reduction.<\/p>\n

        Types of Gearboxes:<\/b>
        Based on customer requirements, gear reduction gearboxes can be classified according to the size of the output shaft, center distance of the output shaft, output speed, and torque. Alternatively, we can provide several commonly used types of gearboxes for customers to choose from.<\/p>\n

        Product Service<\/b><\/h5>\n\n\n\n
        \n

        24-hour Hotline<\/strong><\/p>\n

        \u00a0<\/p>\n

        No matter when and where<\/p>\n

        to call we can find our service to you.<\/p>\n

        \u00a0<\/p>\n

        \u00a0<\/p>\n<\/td>\n

        		\n

        Pre-sales Consultation<\/strong><\/p>\n

        \u00a0<\/p>\n

        We have 5 sales people online,<\/p>\n

        and whether you have any question<\/p>\n

        can be solved through online<\/p>\n

        communication.<\/p>\n<\/td>\n

        		\n

        After-sales Services<\/strong><\/p>\n

        \u00a0<\/p>\n

        Receive products have any<\/p>\n

        questions about the product,<\/p>\n

        can look for us,we will help<\/p>\n

        you deal with the the first time,to your satisfaction.<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        N\u00e4itus
        <\/b>
        Tunnistus<\/b><\/h5>\n

        Company profile<\/b>
        ZheJiang Arrow Machinery Co., Ltd.is a company specializing in R&D, production, sales, application promotion of food engineering projects. As 1 of the largest scaled food processing equipment &whole plant engineering problem solvers in China, machines served for more than 970 companies, export to 116 countries, area, more than 20 years engineering team, we recognize that quality equals value, aims to create a great future together with global customers.<\/p>\n

        KKK<\/strong><\/p>\n

        \u00a0<\/p>\n

        \n

        1.\u00a0 Q:\u00a0How about Arrow Machinery?<\/p>\n

        \u00a0\u00a0\u00a0\u00a0 R:\u00a0ZheJiang Arrow Machinery Co., Ltd. is a High-Tech company. Our firm is composed of a strong \u00a0<\/p>\n

        \n

        \u00a0 \u00a0 \u00a0 \u00a0 team which has substantial experience in R&D, manufacture, technique and sales service and has<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0 specialized in extruder industry for 10 years,leading screw barrel manufacturer in China.
        2. Q:What’s Arrow machinery’s capacity?\u00a0
        \u00a0 \u00a0 R:Company is in strict accordance with CE and ISO9001 quality certification system.There are over 200<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0models of extruders and spare parts.\u00a0<\/p>\n

        3. Q:What’s the delivery time?\u00a0<\/p>\n

        \u00a0 \u00a0\u00a0R:For regular size, we have finished stock and semi-finished stock, 2 weeks max enough<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0 for customized, normally within 20days .<\/p>\n

        4. Q:How about the gearbox quality and price?\u00a0
        \u00a0 \u00a0 R:\u00a0top quality in China with competitive price and globle after-sale service
        5.\u00a0Q:what’s the life time and guarantee buy from Arrow machinery ?
        \u00a0 \u00a0\u00a0R:\u00a03~5years life time\u00a0for nitriding ones and bimtallic ones will be longer\u00a0
        \u00a0 \u00a0 \u00a0 \u00a0\u00a0One year min. Guarantee.
        6.Q:Where is Arrow Machinery\u00a0factory and how to reach there?\u00a0
        \u00a0 \u00a0R:NO.47 Chengbohu\u00a0Road, Xihu (West Lake) Dis. District,HangZhou City, China. You can take the train or plane\u00a0to HangZhou and we can pick\u00a0 \u00a0 \u00a0 \u00a0 you up.
        7.Q:How to contact with you?\u00a0
        \u00a0\u00a0\u00a0R:just reply to me if have any question.\u00a0<\/p>\n

        \n

        \n

        \n\n
        \n\n\n
        \n Saatmiskulud:<\/p>\n
        \n <\/i><\/p>\n
        \n
        \n

        Hinnanguline kaubavedu \u00fchiku kohta.<\/p>\n


        \n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>
        \n\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n <\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/th>\n

        		\n L\u00e4bir\u00e4\u00e4kimiste pidamiseks\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
        <\/div>\n\n\n\n\n\n
        Rakendus:<\/th>\nMootor, masinad<\/td>\n<\/tr>\n
        Funktsioon:<\/th>\nJaotusv\u00f5imsus, ajami p\u00f6\u00f6rdemomendi muutmine, s\u00f5idusuuna muutmine, kiiruse muutmine, kiiruse v\u00e4hendamine, kiiruse suurendamine<\/td>\n<\/tr>\n
        Paigutus:<\/th>\nTs\u00fckloidne<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
        <\/div>\n\n\n\n
        Kohandamine:<\/th>\n\n
        \n
        \n Saadaval\n <\/div>\n

        |<\/span><\/p>\n

        <\/i><\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

        \"ussireduktor\"<\/p>\n

        Kas ussik\u00e4igu reduktor sobib teie rakendusele?<\/h2>\n

        Kui olete huvitatud k\u00e4igukasti reduktorist ja m\u00f5tlete, kas ussik\u00e4iguga reduktor sobib teie rakendusele, olete \u00f5iges kohas. See k\u00e4igukastiga reduktor on t\u00f5hus ja kompaktne. Lisaks on sellel v\u00e4ikesed vahed ja seda on lihtne paigaldada. Vaatame l\u00e4hemalt.<\/p>\n

        See on reduktork\u00e4igukast<\/h2>\n

        Ussreduktork\u00e4igukast on masinaehituses kasutatav reduktor. See k\u00e4ik v\u00e4hendab v\u00e4ljundkiirust, muutes sisend- ja v\u00e4ljundsuhet. K\u00e4igukaste on saadaval erineva suurusega ja need v\u00f5ivad olla valmistatud erinevatest materjalidest, sealhulgas alumiiniumist, malmist ja roostevabast terasest. Selle efektiivsus s\u00f5ltub k\u00e4ikude suhtest ja suurusest. Tavaliselt kasutatakse seda madala kiirusega rakendustes. Kuid seda saab kasutada ka abipiduriseadmena kiirelt liikuvate masinate puhul.
        Reduktori valimisel on oluline otsida mitme hambaga mudeleid. Ideaalis on sellel rohkem hambaid kui vastaval ketirattal. See v\u00e4hendab hammasrataste tekitatavat m\u00fcra. Uss\u00fclekande maksimaalne hammaste arv peaks olema suurem kui 40.
        Uss\u00fclekanded tekitavad v\u00e4hem m\u00fcra ja vibratsiooni kui tavalised \u00fclekanded. Samuti on need odavamad ja v\u00e4iksemad kui teist t\u00fc\u00fcpi reduktorid. Uss\u00fclekannetel on aga m\u00f5ned piirangud, mis muudavad need teist t\u00fc\u00fcpi \u00fclekannetest v\u00e4hem efektiivseks. N\u00e4iteks ei t\u00f6\u00f6ta need nii t\u00f5husalt kui paralleelsed v\u00f5i ortogonaalsed teljed, mis edastavad j\u00f5udu palju paremini.
        Uss\u00fclekannete peamine puudus on m\u00e4\u00e4rimise keerukus. Uss\u00fclekandega reduktorid vajavad hammasrataste spiraalse liikumise t\u00f5ttu rohkem m\u00e4\u00e4rimist. See t\u00e4hendab, et need on v\u00e4hem t\u00f5husad ja kulumiskindlamad kui tavalised k\u00e4igukastid. Spiraalsel liikumisel on probleeme j\u00f5u\u00fclekandega ja see p\u00f5hjustab libisevat h\u00f5\u00f5rdumist ehk libisevat kulumist.
        Ussreduktork\u00e4igukast on reduktork\u00e4igukast, mida kasutatakse kiire mootori aeglustamiseks madalale v\u00e4ljundkiirusele. Ussreduktoriga k\u00e4igukastid pakuvad madalamaid v\u00e4ljundkiirusi, s\u00e4ilitades samal ajal suure p\u00f6\u00f6rdemomendi. Selle k\u00e4igud on valmistatud pronksist v\u00f5i roostevabast terasest ja neil on t\u00e4isnurkne v\u00e4ljund. K\u00e4igud on teiste reduktork\u00e4igukastidega v\u00f5rreldes v\u00e4ga v\u00e4ikesed, seega saab neid kasutada kitsastes kohtades ja rakendustes, kus ruum on piiratud.<\/p>\n

        tasku<\/h2>\n

        Uss\u00fclekandega reduktorid on suurep\u00e4rane valik rakenduste jaoks, mis n\u00f5uavad suurt p\u00f6\u00f6rdemomenti ja madalaid kiirusi. Need reduktoriga k\u00e4igukastid on kompaktsed, vastupidavad ja pika kasutuseaga. Need k\u00e4igukastid sobivad ka t\u00e4is- ja \u00f5\u00f5nesv\u00f5llidega. See omadus v\u00e4listab kettide v\u00f5i rihmade vajaduse, v\u00e4hendades liikuvate osade arvu. Lisaks on neid lihtne hooldada, mis t\u00e4hendab, et need on suurep\u00e4rane valik mitmesuguste rakenduste jaoks.
        Uss\u00fclekandega reduktorid on kompaktsed, mitmek\u00fclgsed ja h\u00f5lpsasti paigaldatavad. Uss\u00fclekanne ise on valmistatud \u00fchest legeerterase t\u00fckist. Sellel on suur keermenurk ning see on vastupidavuse tagamiseks karastatud ja lihvitud. Selle kuus AF-kuuskantpesa on loodud lihtsaks paigaldamiseks ja laia \u00fclekandearvude vahemiku jaoks. Uss\u00fclekandega reduktorid sobivad ka k\u00e4sitsi juhtimiseks. Neid on lihtne paigaldada, need on kompaktse disainiga ja \u00fchilduvad paljude mootorite ja ajamitega.
        Uss\u00fclekandega k\u00e4igukaste kasutatakse sageli t\u00f6\u00f6stuslikes keskkondades, kus suurte objektide liigutamiseks on vaja v\u00e4ikest p\u00f6\u00f6rdemomenti. Need on kasulikud ka siis, kui ruumi on v\u00e4he. Need on kompaktsed ja neid on lihtne paigaldada kitsastesse kohtadesse. Uss\u00fclekanded v\u00e4hendavad komistamise ohtu ja on sageli valmistatud vastupidavatest materjalidest, mist\u00f5ttu on need populaarne valik.
        V\u00f5rreldes planetaark\u00e4igukastidega on ussik\u00e4igukastidel palju eeliseid. Need on vaiksed, tekitavad v\u00e4hem m\u00fcra ja on mugavamad kasutada. Samuti on need energiat\u00f5husamad kui nende planetaark\u00e4igukastid. Lisaks saab neid kombineerida teiste k\u00e4igukastide ja k\u00e4igukastidega, et suurendada nende v\u00e4ljundv\u00f5imsust.
        \"ussireduktor\"<\/p>\n

        See on k\u00f5rge efektiivsusega<\/h2>\n

        Kui reduktormootoris kasutatakse ussreduktorit, on oluline m\u00e4rkida selle \u00e4\u00e4rmiselt k\u00f5rget efektiivsust. Seda t\u00fc\u00fcpi reduktork\u00e4igukast on tavaliselt palju kuumem kui h\u00fcpoidreduktoriga k\u00e4igukast, mis v\u00e4hendab k\u00e4igu kasutusiga. Liugk\u00e4ikude suurenenud termiline koormus p\u00f5hjustab tihendite enneaegset kulumist ja lekkeid. Lisaks p\u00f5hjustab liigne kuumus m\u00e4\u00e4rdeaine lagunemist ja v\u00f5ib p\u00f5hjustada saastumist. Spiraalk\u00e4iguga reduktorid on oluliselt jahedamad ja v\u00e4hese hooldusega. Seet\u00f5ttu v\u00f5ivad need v\u00e4hendada tehase seisakuid ja energiakulusid.
        Servo-ussreduktoriga k\u00e4igukast on suurep\u00e4rane valik rakenduste jaoks, mis n\u00f5uavad suurt j\u00f5udlust, korduvust ja t\u00e4pset positsioneerimist. Need hammasratta-reduktoriga k\u00e4igukastid on spetsiaalselt loodud kasutamiseks servomootoritehnoloogiaga, mis tagab hammasratta-mootori tiheda integreerimise. Servo-ussreduktoriga k\u00e4igukasti muude eeliste hulka kuuluvad v\u00e4iksem nurkl\u00f5tk ja pikem eluiga.
        H\u00fcpoidreduktormootorid pakuvad suuremat efektiivsust ja v\u00f5imaldavad kasutada v\u00e4iksemaid mootoreid. 1 hj ussreduktork\u00e4igukast suudab toota sama palju v\u00f5imsust kui 1\/2 hj h\u00fcpoidreduktork\u00e4igukast. Agknxi uuringus v\u00f5rreldi kahte t\u00fc\u00fcpi reduktork\u00e4igukaste, v\u00f5rreldes v\u00f5imsust, p\u00f6\u00f6rdemomenti ja efektiivsust. Selle tulemusena on 1\/2 hj h\u00fcpoidreduktormootorit palju odavam k\u00e4itada kui 1 hj ussreduktork\u00e4igukasti.
        Ussk\u00e4igukasti efektiivsus s\u00f5ltub paljudest teguritest, sealhulgas hammasrataste hambumusest ning laagrite ja \u00f5litihendite huulte kadudest. Reduktori kiirus ja koormus m\u00f5jutavad samuti selle efektiivsust. Seet\u00f5ttu tuleks ussk\u00e4igukastides kasutada \u00f5iget t\u00fc\u00fcpi m\u00e4\u00e4rdeainet.
        Ussk\u00e4igukasti reduktoris p\u00f6\u00f6rleb mittel\u00f5ikuv v\u00f5ll hammasratta vastu, samal ajal kui v\u00e4ljundussk\u00e4igukast p\u00f6\u00f6rleb risti. See paigutus tagab suure efektiivsuse, v\u00e4hendades samal ajal k\u00e4igukasti mootori m\u00fcra ja vibratsiooni. See k\u00e4igukasti reduktor on ka vaikne ja madala h\u00f5\u00f5rdeteguriga.<\/p>\n

        Sellel on madal kliirens<\/h2>\n

        Uss\u00fclekandega k\u00e4igukastid on tavaliselt konstrueeritud v\u00e4ikese kliirensiga, mis t\u00e4hendab, et uss ei tohi k\u00e4igukasti rattaid puudutada. Kasutatav m\u00e4\u00e4rdeaine s\u00f5ltub hammasratta suurusest ja on tavaliselt ISO 680 v\u00f5i ISO 460. Suurema viskoossusega m\u00e4\u00e4rdeainete puhul on vaja spetsiaalset varustust.
        Uss\u00fclekanded on populaarsed masinates, mis peavad kiiresti peatuma, n\u00e4iteks liftides ja elevaatorites. Hammasrattad ja uss\u00fclekanne on valmistatud pehmest materjalist, mis minimeerib l\u00f5tku ja rikete m\u00e4\u00e4ra. Need on populaarsed ka raskeveokite masinates, n\u00e4iteks kivipurustites. Kuigi see on nende konstruktsiooni oluline aspekt, on uss\u00fclekande valimisel ka teisi tegureid, mida arvestada.
        Uss\u00fclekannetel on mitu hammast, mis v\u00f5imaldab suuremat kontaktpinda ja paremat koormuse jaotumist. See omadus v\u00f5imaldab saavutada suuri \u00fclekandearvusid ilma v\u00f5imsust ohverdamata. Uss\u00fclekandeid saab teiste k\u00e4igukastidega kombineerida, et suurendada s\u00fcsteemi \u00fcldist efektiivsust.
        Uss\u00fclekandeid kasutatakse sageli rasketes masinates, sealhulgas veoautodes, mis kihutavad m\u00f6\u00f6da inimt\u00fchja maanteed. Neid v\u00f5ib leida ka pakendamismasinates, konveierites ja muudes v\u00e4ikestes masinates. Nende ainulaadne kuju muudab need ideaalseks kitsastes kohtades kasutamiseks. Kuid need kipuvad ka palju kiiremini kuluma kui tavalised \u00fclekanded.
        \"ussireduktor\"<\/p>\n

        Sellel on k\u00f5rge p\u00f6\u00f6rdemomendi ja kaalu suhe<\/h2>\n

        Ussk\u00e4igukastiga reduktor on mitmek\u00fclgne k\u00e4igukast, mis tagab k\u00f5rge p\u00f6\u00f6rdemomendi ja kaalu suhte. Neid reduktork\u00e4igukaste kasutatakse tavaliselt rakendustes, mis n\u00f5uavad suurt p\u00f6\u00f6rdemomenti ja suuri \u00fclekandearvusid, n\u00e4iteks t\u00f6\u00f6pinkides. Neil on ka v\u00e4ga kompaktne disain, mis v\u00f5imaldab v\u00e4ga suuri \u00fclekandearvusid madalatel kiirustel.
        Uss\u00fclekandega reduktorid on v\u00e4ga vaiksed, peamiselt seet\u00f5ttu, et sisend- ja v\u00e4ljundv\u00f5ll on \u00fcksteisega risti. Nende madal m\u00fcratase on planetaar\u00fclekannetega v\u00f5rreldes eeliseks. V\u00f5rreldes planetaar\u00fclekannetega on uss\u00fclekandega reduktorid ka suhteliselt odavad.
        Uss\u00fclekanne koosneb kahest osast: spiraalliigendiga uss\u00fclekandest ja ussist. Kruvitud uss\u00fclekandega on v\u00f5lliga \u00fchendatud spiraalkeerme abil. Uss\u00fclekanne on kuue lihtsa masina variatsioon. Uss asub ussirattas, mis sunnib ussi p\u00f6\u00f6rlema. See muudab ka liikumistasandit. Uss\u00fclekanded on tavaliselt valmistatud terasest v\u00f5i messingist.
        Ussk\u00e4igukastid on \u00fched populaarsemad reduktork\u00e4igukastide t\u00fc\u00fcbid. Need pakuvad suurt p\u00f6\u00f6rdemomenti ja suurt kiirussuhet kompaktses pakendis. Neid reduktork\u00e4igukaste kasutatakse paljudes j\u00f5u\u00fclekandes\u00fcsteemides, sealhulgas liftides, turvav\u00e4ravates, konveierilintidel ja meditsiinilistes testimisseadmetes.
        Ussreduktoriga k\u00e4igukastid on saadaval erineva kuju ja suurusega, sealhulgas paralleelv\u00f5lliga reduktoriga k\u00e4igukastid ja planetaarsed ussreduktoriga k\u00e4igukastid. Neil on k\u00f5rge p\u00f6\u00f6rdemomendi ja kaalu suhe ning neid on lihtne hooldada. Samuti on need kerged ja suhteliselt h\u00f5lpsasti paigaldatavad. See teeb neist suurep\u00e4rase valiku paljude rakenduste jaoks.
        Usse saab kokku panna astmeliste v\u00f5llide, kinnituskruvide v\u00f5i t\u00fc\u00fcblite abil. Ussile m\u00f5jub aga palju t\u00f5ukej\u00f5udu ja seda tuleb kindlalt kinnitada. See v\u00f5ib p\u00f5hjustada tagasil\u00f6\u00f6gi. Samuti v\u00f5ivad laagrid lahti tulla ja uss liikuda. Tagasil\u00f6\u00f6gi v\u00e4ltimiseks veenduge, et ussi\u00fclekande v\u00f5ll l\u00e4bib ussi pinna laiuse keskpunkti.<\/p>\n

        \"Hiina\"Hiina
        editor by CX 2023-06-12<\/p>","protected":false},"excerpt":{"rendered":"

        Product Description Overview Product Description\u00a0 Wide Selection of Gearbox ProductsThe gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[2486,255,168,278,281,650,2046,606,208,653,654,215,576,659,2487,782,610,567,582],"class_list":["post-816","post","type-post","status-publish","format-standard","hentry","category-uncategorized","tag-1500-rpm-gearbox","tag-china-gearbox","tag-china-motor","tag-gearbox","tag-gearbox-china","tag-gearbox-motor","tag-gearbox-rpm","tag-gearbox-speed","tag-motor","tag-motor-gearbox","tag-motor-gearbox-china","tag-motor-motor","tag-motor-worm","tag-motor-worm-gearbox","tag-reduce","tag-rpm-motor","tag-speed-gearbox","tag-worm-gearbox","tag-worm-motor"],"_links":{"self":[{"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/posts\/816","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/comments?post=816"}],"version-history":[{"count":0,"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/posts\/816\/revisions"}],"wp:attachment":[{"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/media?parent=816"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/categories?post=816"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/et\/wp-json\/wp\/v2\/tags?post=816"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}