China high quality DC 12V 24V Worm Gear Motor for Seniautomatic Wire Feeders High Speed Low Noise with Free Design Custom

Kauba kirjeldus

Seniautomatic traadi etteande jaoks mõeldud DC 12V 24V ussülekandega mootor, suur kiirus, vähendatud müratase

1) Toote kirjeldus:
    1° suurus: läbimõõt 59mm 
    2° eluiga: 5000 tundi 
    3° hammasratta materjalid: plastik või messing
    4° IP kaitseaste: IP54

2) Täielik spetsifikatsioon:
 

kolm) Joonis:

 

4) Võlli joonis:

 

viis) Rakendus:

 

 keevitusseadmed, elektrimaja, CZPT seadmed, töökoha intelligentsed tööriistad, vaba aja veetmise võimalused, animeeritud masinad ja nii edasi.

Mootori pinge: DC12V, 24V, 42V, 48V, 90V, 110V, 300V

Mootori nimivõimsus: 15W, 25W, 30W, 45W, 65W, 95W, 120W, 150W, 180W

Mootori tühikäigu kiirus: 15 p/min, 30 p/min, 60 p/min, 80 p/min, 120 p/min, 150 p/min, 180 p/min, 200 p/min, 220 p/min.

kuus) Tehase väljapanek:

seitse) Ülekanne viis:

 

Pakkumiskutse:

K: Kas olete ostu-müügiettevõte või tootja?

A: We are Integration of sector and trade, with over twenty a long time knowledge in DC worm equipment motor. Our company have accrued experienced creation line, total administration and effective investigation assistance, which could match all of the customers’ requirements and make them gratification.
 

K: Mis on teie peamine objekt?

–AlalisvoolumootorKäigumootor, ruutmootor, astmemootor ja mikromootor
-Keevitusseadmed: traadi etteandeseade, keevitusvarras, keevituspõleti, maandusklamber, elektroodihoidik ja alaldi
 

K: Mis saab siis, kui ma ei tea kunagi, millist alalisvoolumootorit mul vaja on?

A: Don’t be concerned, Send out as significantly details as you can, our crew will support you locate the correct 1 you are hunting for.
 

K: Millised on teie maksetingimused?

A: Makse = 1000 USD, thirty% T/T pooleli, harmoonia vahetult enne saatmist.
Kui teil on veel küsimusi, võtke meiega julgelt ühendust allpool toodud kontaktandmetel:
 

K: Kuidas toimub saatmine ja kohaletoimetamine:

A: By sea – Purchaser appoint forwarder, or our income crew uncover ideal forwarder for customers. 

By air – Customer provide accumulate express account, or our revenue team find suited specific for consumers. (Mainly for sample)
Other individuals – Really,samples send by DHL,UPS, TNT and Fedex and so on. We set up to shipping and delivery items to some location from China appointed by buyers.

K: Kui pikk on teie tarneaeg?
V: Üldiselt on see 5–10 korda suurem, kui kaup on laos, või 15–20 korda suurem, kui kaupa laos pole, olenevalt kogusest.

 

Ussvõllid ja käigukastid

Kui teil on käigukast, võite endalt küsida, milline on teie rakenduse jaoks ideaalne ussvõll. Arvestada tuleb paljude asjadega, näiteks nõgusa kuju, keermete arvu ja määrimisega. See artikkel selgitab iga üksikut küsimust ja aitab teil valida oma käigukasti jaoks õige ussvõlli. Turul on palju valikuid, seega ärge oodake uurimisega. Kui olete käigukastide maailmas uus, lugege edasi, et saada rohkem teada selle populaarse käigukasti tüübi kohta.

Nõgus kuju

The geometry of a worm equipment differs substantially depending on its maker and its intended use. Early worms had a standard profile that resembled a screw thread and could be chased on a lathe. Afterwards, tools with a straight sided g-angle ended up developed to produce threads that had been parallel to the worm’s axis. Grinding was also created to boost the end of worm threads and decrease distortions that arise with hardening.
To decide on a worm with the suitable geometry, the diameter of the worm gear have to be in the identical device as the worm’s shaft. As soon as the fundamental profile of the worm gear is identified, the worm equipment tooth can be specified. The calculation also involves an angle for the worm shaft to avoid it from overheating. The angle of the worm shaft ought to be as close to the vertical axis as attainable.
Topeltümbrisega ussiülekannetel seevastu puudub ussi ümber ava. Need on spiraalsed käigud sirge ussivõlliga. Kuna ussi hambad on omavahel kontaktis, tekitavad nad olulist hõõrdumist. Erinevalt topeltümbrisega ussiülekannetest on avauseta ussiülekanded palju kompaktsemad ja sobivad väiksemate sajaliste hammaste jaoks. Neid on ka lihtsam valmistada.
Erinevate tootjate ussiülekanded pakuvad mitmeid positiivseid külgi. Näiteks on ussiülekanded üks edukamaid meetodeid pöördemomendi suurendamiseks, samas kui madalama kvaliteediga osi, näiteks pronksi, on keeruline määrida. Ussiülekannetel on ka madalam rikkeprotsent, kuna need jätavad disainiprotsessis märkimisväärset mänguruumi. Isegi kahe standardi erinevuste korral on ussiülekande süsteemi üldine jõudlus sama.
Koonusekujuline uss on veel üks liik. See on tehnoloogiline skeem, mis ühendab sirge ussivõlli nõgusa kaarega. Nõgus kaar on ka väärtuslik utiliitkonstruktsioon. Sellise kujuga ussidel on korraga rohkem kui kolm kontakti, mis tähendab, et nad saavad ilma liigse kasutamiseta suure läbimõõdu vähendada. See on ka suhteliselt odav konstruktsioon.

Keerme näidis

A good worm gear calls for a ideal thread sample. There are a number of key parameters that decide how excellent a thread sample is. First of all, the threading pattern have to be ACME-threaded. If this is not feasible, the thread have to be produced with straight sides. Then, the linear pitch of the “worm” should be the same as the circular pitch of the corresponding worm wheel. In simple phrases, this implies the pitch of the “worm” is the exact same as the round pitch of the worm wheel. A quick-modify gearbox is usually utilized with this type of worm gear. Alternatively, direct-screw adjust gears are utilized alternatively of a swift-change gear box. The pitch of a worm equipment equals the helix angle of a screw.
A worm gear’s axial pitch must match the round pitch of a equipment with a larger axial pitch. The round pitch is the distance between the details of enamel on the worm, even though the axial pitch is the distance amongst the worm’s enamel. One more factor is the worm’s direct angle. The angle between the pitch cylinder and worm shaft is referred to as its direct angle, and the higher the lead angle, the increased the performance of a equipment.
Ussülekande hammaste geomeetria võib ettevõttest ja kasutusotstarbest olenevalt erineda. Varasematel ussidel meenutas keermestamine kruvi keermestamist ja seda oli treipingi abil väga lihtne freesida. Hiljem parandas lihvimine ussi keermestamise viimistlust ja minimeeris kõvenemisest tingitud moonutusi. Seetõttu on tänapäeval enamiku ussülekannete keermemuster vastavalt nende suurusele. Ussülekande valimisel veenduge enne ostmist keermete arvus.
A worm gear’s threading is crucial in its procedure. Worm enamel are normally cylindrical, and are organized in a pattern similar to screw or nut threads. Worm enamel are typically shaped on an axis of perpendicular in comparison to their parallel counterparts. Simply because of this, they have increased torque than their spur gear counterparts. In addition, the gearing has a minimal output speed and higher torque.

Erinevad niidid

Erinevat tüüpi ussülekannetel on planetaarülekannetel erinev keermete arv. Ühekeermelist ussülekannet ei tohiks kasutada kahekeermelise ussiga. Ühekeermelist ussülekannet tuleks kasutada ühekeermelise ussiga. Ühekeermelised ussid on kiiruse vähendamiseks palju edukamad kui kahekeermelised.
The amount of threads on a worm’s shaft is a ratio that compares the pitch diameter and amount of enamel. In standard, worms have 1,2,4 threads, but some have a few, five, or 6. Counting thread begins can aid you figure out the quantity of threads on a worm. A solitary-threaded worm has fewer threads than a a number of-threaded worm, but a multi-threaded worm will have a lot more threads than a mono-threaded planetary equipment.
To measure the variety of threads on a worm shaft, a tiny fixture with two ground faces is utilised. The worm must be taken out from its housing so that the finished thread location can be inspected. After figuring out the amount of threads, simple measurements of the worm’s outside the house diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth room is created making use of epoxy substance. The casting is moulded amongst the two tooth flanks. The V-block fixture rests in opposition to the outside diameter of the worm.
The round pitch of a worm and its axial pitch need to match the round pitch of a larger equipment. The axial pitch of a worm is the distance between the factors of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in one particular revolution. The guide angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s pace transmission ratio is dependent on the amount of threads. A worm equipment with a substantial ratio can be simply lowered in one particular stage by utilizing a set of worm gears. Nevertheless, a multi-thread worm will have a lot more than two threads. The worm equipment is also far more successful than single-threaded gears. And a worm gear with a high ratio will let the motor to be used in a range of programs.

Määrimine

Ussülekande määrimine on eriti nõudlik selle hõõrdumise ja suurema libiseva kokkupuute tõttu ajamiga. Hea uudis on see, et määrdeainete osas on palju võimalusi, näiteks segaõlid. Segaõlid on mineraalpõhised määrdeained, mis on valmistatud kümnest % või enamast rasvhappest, rooste- ja oksüdatsiooni inhibiitoritest ning muudest lisanditest. See segu parandab määrimisvõimet, vähendab hõõrdumist ja vähendab libisemist.
When deciding on a lubricant for a worm shaft, make confident the product’s viscosity is appropriate for the type of gearing utilized. A lower viscosity will make the gearbox difficult to actuate and rotate. Worm gears also go through a increased sliding movement than rolling motion, so grease have to be able to migrate evenly all through the gearbox. Recurring sliding motions will drive the grease absent from the contact zone.
Veel üks kaalutlusväärne tegur on hammasrataste lõtk. Ussülekannetel on suured ülekandearvud, mõnikord 300:1. See on elektrirakenduste jaoks oluline, kuid samal ajal ebaefektiivne. Ussülekanded võivad libisemise ajal soojust toota, seega on kvaliteetne määrdeaine oluline. Selline määrdeaine vähendab kuumust ja tagab optimaalse üldise jõudluse. Järgmised soovitused aitavad teil valida oma ussülekandele õige määrdeaine.
In low-speed programs, a grease lubricant could be adequate. In larger-velocity applications, it truly is very best to apply a artificial lubricant to avert untimely failure and tooth dress in. In both instances, lubricant selection depends on the tangential and rotational pace. It is important to adhere to manufacturer’s suggestions concerning the selection of lubricant. But remember that lubricant option is not an easy job.