Produktbeskrivelse
Produktbeskrivelse
Produktbeskrivelse
-R Series Helical gearbox
Product Features:
1.High modular design.
2.Integrated casting housing,compact dimension,high loading support, stable transmitting and low noise level.
3.Perfect oil leakage preventing makes the good sealings and can be used in wide range of industry.
4.This series is special for pug mill.
5.High efficiency and save power.
6.Save cost and low maintenance.
Design Features:
1. Compact structure, modular design
2. Single-stage, two-stage and three-stage sizes
3. Can be combined with other types of gearboxes (Such as R Series, K Series, F Series, S Series, UDL Series)
Produktparametre
1 Stage
| Modeller | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Forhold | Max. Torque(Nm) |
| BRX/BRXF38 | 20mm | 16mm | 0.18~1.1 | 1.62~4.43 | 20 |
| BRX/BRXF58 | 20mm | 19mm | 0.18~5.5 | 1.3~5.5 | 70 |
| BRX/BRXF68 | 25 mm | 19mm | 0.18~7.5 | 1.4~6.07 | 135 |
| BRX/BRXF78 | 30 mm | 24mm | 1.1~11 | 1.42~8.00 | 215 |
| BRX/BRXF88 | 40 mm | 28mm | 3~22 | 1.39~8.65 | 400 |
| BRX/BRXF98 | 50mm | 38mm | 5.5~30 | 1.42~8.23 | 600 |
| BRX/BRXF108 | 60mm | 42mm | 7.5~45 | 1.44~6.63 | 830 |
| BRX/BRXF128 | 75 mm | 55mm | 7.5~90 | 1.51~6.2 | 1110 |
| BRX/BRXF158 | 90 mm | 70mm | 11~132 | 1.57~6.2 | 1680 |
2-3Stage
| Modeller | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Forhold | Max. Torque(Nm) |
| BR/BRF18 | 20mm | – | 0.18~0.75 | 3.83~74.84 | 85 |
| BR/BRF28 | 25 mm | 16mm | 0.18~3 | 3.37~135.09 | 130 |
| BR/BRF38 | 25 mm | 16mm | 0.18~3 | 3.41~134.82 | 200 |
| BR/BRF48 | 30 mm | 19mm | 0.18~5.5 | 3.83~176.88 | 300 |
| BR/BRF58 | 35mm | 19mm | 0.18~7.5 | 4.39~186.89 | 450 |
| BR/BRF68 | 35mm | 19mm | 0.18~7.5 | 4.29~199.81 | 600 |
| BR/BRF78 | 40 mm | 24mm | 0.18~11 | 5.21~195.24 | 820 |
| BR/BRF88 | 50mm | 28mm | 0.55~18.5 | 5.36~246.54 | 1550 |
| BR/BRF98 | 60mm | 38mm | 0.55~30 | 4.49~289.6 | 3000 |
| BR/BRF108 | 70mm | 42mm | 2.2~45 | 5.06~249.16 | 4300 |
| BR/BRF138 | 90 mm | 55mm | 5.5~55 | 5.51~222.6 | 8000 |
| BR/BRF148 | 110 mm | 55mm | 11~90 | 5.00~163.31 | 13000 |
| BR/BRF168 | 120mm | 70mm | 11~160 | 8.77~229.71 | 18000 |
Materials Data Sheet
| Husmateriale | Gråt støbejern |
| Husets hårdhed | HBS163~255 |
| Gearmateriale | 20CrMnTi legeret stål |
| Overfladehårdhed af gear | HRC58°~62 ° |
| Gearkernens hårdhed | HRC33~48 |
| Materiale for indgangs-/udgangsaksel | 40Cr legeret stål |
| Indgangs-/udgangsakselhårdhed | HRC32~36 |
| Præcisionsbearbejdning af tandhjul | præcis slibning, 6~5 grad |
| Smøreolie | GB L-CKC220-460, Shell Omala220-460 |
| Varmebehandling | anløbning, cementering, bratkøling, normalisering osv. |
| Effektivitet | 94%~96% (afhænger af transmissionstrinnet) |
| Støj (MAX) | 60~68dB |
| Temperaturstigning (MAX) | 40°C |
| Temperaturstigning (olie) (MAX) | 50°C |
| Vibration | ≤20µm |
| Modreaktion | ≤20Arcmin |
| Mærke af lejer | Lejer af førende mærker i Kina, HRB/LYC/ZWZ/C&U. Eller andre mærker efterspurgt, SKF, FAG, INA, NSK. |
| Mærke af oliepakning | NAK — ZheJiang or other brands requested |
Detaljerede billeder
Our process of production
Our product line
Firmaprofil
Firmaprofil
Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.
Ofte stillede spørgsmål
Q1: Are you trading company or manufacturer?
A: Vi er fabrikken.
Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box
Q3: Can you make as per custom drawing?
A: Ja, vi tilbyder skræddersyet service til kunder.
Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Husets farve.
c) Purchase quantity.
d) Other special requirements.
Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q7: What is your terms of payment ?
A: 30% Forudbetaling via T/T efter underskrivelse af kontrakten. 70% før levering
If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂
| Anvendelse: | Maskiner, Marine, Landbrugsmaskiner |
|---|---|
| Fungere: | Fordelingseffekt, ændring af drivmoment, hastighedsændring, hastighedsreduktion |
| Layout: | Koaksial |
| Hårdhed: | Hærdet tandoverflade |
| Installation: | Vertikal type |
| Trin: | Enkelttrin |
| Prøver: | US$ 50/Stk. 1 stk. (min. ordre) | |
|---|
| Tilpasning: | Tilgængelig |
|
|---|
Worm reducer gearbox – What You Need to Know
Når du køber en snekkegearkasse, er det vigtigt at overveje enhedens funktioner og egenskaber. Det er også vigtigt at tage højde for dens pris. Vi vil se på de forskellige typer snekkegearkasser og de anvendelser, de kan bruges til. Dette vil hjælpe dig med at vælge den rigtige enhed til din anvendelse.
Funktioner
Snekkegear er populære i instrumenter, der kræver hurtig stop, såsom elevatorer og lifte. Deres bløde materialer gør det muligt for dem at absorbere stød, hvilket reducerer sandsynligheden for svigt. De er også fordelagtige i tunge maskiner, såsom stenknusere. Nogle producenter tilbyder specielle snekker med nul slør og reduktion af høj nøjagtighed. Snekkegearkassen har en række funktioner, herunder en aksial stigning og en cirkulær stigning. Snekkens aksiale stigning skal matche den cirkulære stigning på det større gear. Dens gevind er venstre- eller højredrejede, og dens forvinkel er den afstand, et punkt på gevindet tilbagelægger under en omdrejning af snekken. Snekkegearkassen er bredt tilgængelig, og gearproducenter har typisk et stort lager af dem. Fordi snekkegear er standardiserede, er deres monteringsdimensioner generelt ensartede på tværs af producenter. Det betyder, at valg af et ikke kræver, at du ændrer højden, længden eller diameteren på udgangsakslen. Snekkegearkasser har også dimensionel ensartethed. Snekkegear er meget effektive. De har en høj belastningskapacitet og en lav friktionskoefficient. Snekkehjulene har også en præcis tandprofil, hvilket reducerer hastighedsudsving og muliggør støjsvag drift.
Funktioner
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applikationer
Denne markedsrapport analyserer markedet for snekkegearkasser fra et globalt perspektiv. Den indeholder en omfattende analyse af de nuværende markedstendenser og fremtidige vækstudsigter. Den giver også information om konkurrencelandskabet og de vigtigste aktører i branchen. Rapporten fremhæver også de vigtigste faktorer, der påvirker væksten på markedet for snekkegearkasser.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Koste
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspekt
Snekkegearkasser varierer i størrelse. De har et, to eller flere gevind. Hvert gevind har en forvinkel. Et højt gear har flere tænder end et lavt gear, og et lavt gear har færre tænder. Disse forskelle er et resultat af gearingen. Størrelsen på snekkegearkassen bør vælges i henhold til den specifikke anvendelse. Snekkegearkassen sparer plads og giver mere drejningsmoment. Agknx Gearbox har skabt en række modeller for at overvinde almindelige decelerationsudfordringer, fra standard til hygiejniske markeder. Den overlegne transmission Agknx-serie er designet til at løse almindelige decelerationsudfordringer og udvides for at imødekomme behovene i sanitetsindustriens industri. Diameteren på snekkegearkassen er en vigtig overvejelse. Dens diameter skal være lig med eller lidt større end diameteren på slibeskiven eller værktøjet. Dette vil påvirke trykvinklen. Trykvinklen på en snekkegearkasse afhænger af flere faktorer, herunder dens diameter og forvinkel. Diameteren på slibeskiven eller værktøjet har også en effekt på snekkens profil. Snekkegearkasser er almindelige. Mange gearproducenter har store lagre af disse gearreduktionsgearkasser. Da gear er standardiserede, er monteringsdimensionerne for snekkegear også almindelige blandt producenter. Dette gør det nemt at vælge en snekkegearreduktionsgearkasse til din anvendelse. Derudover er snekkegearreduktionsgearkassen nem at installere og vedligeholde.
Gearkasseolie til snekkegearreduktion
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by CX 2023-06-13