Produktbeskrivelse
SMRV series worm-gear speed reducer is a new-generation of products developed by our company with combination of advanced by technology both at home and abroad.
Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
Technical data:
(1) Motor input power:0.06kw-15kw
(2) Output torque:4-2320N.M
(3) Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4) With IEC motor input flange: 56B14/71B14/80B5/90B5
Materialer:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-150: Cast iron housing
(3) Bearing: CHINAMFG bearing & Homemade bearing
(4) Lubricant: Synthetic & Mineral
(5) The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6) With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
Farve:
(1) Blue / Light blue
(2) Silvery White
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) Every product must be tested before sending
| Motor power | Model | speed ratio | output speed | output toruqe |
| 0.06kw 1400rpm | NMRV030 | 5 | 280rpm | 2.0N.M |
| NMRV030 | 7.5 | 186rpm | 2.6N.M | |
| NMRV030 | 10 | 140rpm | 3.3N.M | |
| NMRV030 | 15 | 94rpm | 4.7N.M | |
| NMRV030 | 20 | 70rpm | 5.9N.M | |
| NMRV030 | 25 | 56rpm | 6.8N.M | |
| NMRV030 | 30 | 47rpm | 7.9N.M | |
| NMRV030 | 40 | 35rpm | 9.7N.M | |
| NMRV030 | 50 | 28rpm | 11.0N.M | |
| NMRV030 | 60 | 24rpm | 12.0N.M | |
| NMRV030 | 80 | 18rpm | 14.0N.M | |
| 0.09kw 1400rpm | NMRV030 | 5 | 280rpm | 2.7N.M |
| NMRV030 | 7.5 | 186rpm | 3.9N.M | |
| NMRV030 | 10 | 140rpm | 5.0N.M | |
| NMRV030 | 15 | 94rpm | 7.0N.M | |
| NMRV030 | 20 | 70rpm | 8.8N.M | |
| NMRV030 | 25 | 56rpm | 10.0N.M | |
| NMRV030 | 30 | 47rpm | 12.0N.M | |
| NMRV030 | 40 | 35rpm | 14.0N.M | |
| NMRV030 | 50 | 28rpm | 17.0N.M | |
| NMRV030 | 60 | 24rpm | 18.0N.M | |
| 0.12kw 1400rpm | NMRV030 | 5 | 280rpm | 3.6N.M |
| NMRV030 | 7.5 | 186rpm | 5.2N.M | |
| NMRV030 | 10 | 140rpm | 6.6N.M | |
| NMRV030 | 15 | 94rpm | 9.3N.M | |
| NMRV030 | 20 | 70rpm | 12.0N.M | |
| NMRV030 | 25 | 56rpm | 14.0N.M | |
| NMRV030 | 30 | 47rpm | 16.0N.M | |
| NMRV030 | 40 | 35rpm | 19.0N.M | |
| NMRV030 | 50 | 28rpm | 22.0N.M | |
| 0.18kw 1400rpm | NMRV030 | 5 | 280rpm | 5.3N.M |
| NMRV030 | 7.5 | 186rpm | 7.7N.M | |
| NMRV030 | 10 | 140rpm | 10.0N.M | |
| NMRV030 | 15 | 94rpm | 14.0N.M | |
| NMRV030 | 20 | 70rpm | 18.0N.M | |
| NMRV030 | 25 | 56rpm | 20.0N.M | |
| NMRV030 | 30 | 47rpm | 24.0N.M |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Anvendelse: | Industry |
|---|---|
| Hårdhed: | Hærdet |
| Type: | Worm and Wormwheel |
| Output Speed: | 14-280rpm |
| Input Speed: | 1400rpm |
| Ouput Torque: | 2.6-1195n.M |
| Tilpasning: | Tilgængelig |
|
|---|
Can you explain the impact of worm wheels on the overall efficiency of gearing systems?
Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:
- Gearreduktion: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
- Inherent Efficiency Loss: Worm gears inherently introduce some efficiency loss due to the sliding action that occurs between the worm and the worm wheel. This sliding action generates friction, which results in energy losses and heat generation. Compared to other types of gears, such as spur gears or helical gears, worm gears typically have lower efficiency levels.
- Self-Locking Property: One unique characteristic of worm wheels is their self-locking property. When the worm wheel is not being actively driven, the friction generated between the worm and the worm wheel prevents the worm wheel from rotating backward. This self-locking feature provides stability and prevents the system from backdriving. However, it also contributes to the overall efficiency loss of the gearing system.
- Lubrication and Friction: Proper lubrication of worm wheels is crucial for reducing friction and improving their efficiency. Lubrication forms a thin film between the worm and the worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher energy losses, and reduced efficiency. Therefore, maintaining appropriate lubrication levels is essential for optimizing the efficiency of worm gear systems.
- Design Factors: Several design factors can impact the efficiency of worm wheels. These include the tooth profile, helix angle, material selection, and manufacturing tolerances. The tooth profile and helix angle can influence the contact pattern and the distribution of loads, affecting efficiency. The choice of materials with low friction coefficients and good wear resistance can help improve efficiency. Additionally, maintaining tight manufacturing tolerances ensures proper meshing and reduces energy losses due to misalignment or backlash.
- Driftsforhold: The operating conditions, such as the applied load, speed, and temperature, can also affect the efficiency of worm wheels. Higher loads and speeds can lead to increased friction and energy losses, reducing efficiency. Elevated temperatures can cause lubricant degradation, increased viscosity, and higher friction, further impacting efficiency. Therefore, operating within the specified load and speed limits and maintaining suitable operating temperatures are essential for optimizing efficiency.
In summary, worm wheels have a notable impact on the overall efficiency of gearing systems. While they offer high gear reduction ratios and self-locking capabilities, they also introduce inherent efficiency losses due to friction and sliding action. Proper lubrication, suitable design considerations, and operating within specified limits are essential for maximizing the efficiency of worm gear systems.
Hvordan påvirker designet af snekkehjul deres ydeevne i forskellige miljøer?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Tandprofil: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Materialevalg: Materialevalget til snekkehjul er afgørende for deres ydeevne i forskellige miljøer. Snekkehjul kan fremstilles af forskellige materialer, herunder stål, bronze, messing eller speciallegeringer. Hvert materiale tilbyder forskellige egenskaber såsom styrke, slidstyrke, korrosionsbestandighed og selvsmøring. Valget af det passende materiale afhænger af faktorer som driftsforhold, forventede belastninger og miljøfaktorer. For eksempel kan man i applikationer, hvor korrosionsbestandighed er afgørende, vælge et rustfrit stål eller en korrosionsbestandig legering for at sikre langvarig ydeevne i barske miljøer.
- Smøring og tætning: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Varmeafledning: I miljøer med høje temperaturer bør designet af snekkehjul tage højde for varmeafledningsmekanismer. Overdreven varme kan føre til for tidligt slid, reduceret effektivitet og potentiel skade på gearsystemet. Designet kan omfatte funktioner som køleribber, køleplader eller ventilationskanaler for at lette varmeafledningen og opretholde optimale driftstemperaturer. Korrekt design af varmeafledning sikrer snekkehjulenes levetid og pålidelighed i miljøer med høje temperaturer.
- Støj- og vibrationskontrol: Designet af snekkehjul kan omfatte funktioner til at kontrollere støj og vibrationer, hvilket er særligt vigtigt i visse miljøer. Ændringer af tandprofilen, produktionstolerancer eller tilføjelse af dæmpningselementer kan bidrage til at reducere støj- og vibrationsgenerering. I støjfølsomme miljøer eller applikationer, hvor overdreven vibration kan påvirke præcision eller stabilitet, bør designet prioritere støj- og vibrationskontrolforanstaltninger for at sikre jævn og støjsvag drift.
- Miljøfaktorer: Designet af snekkehjul bør tage hensyn til specifikke miljøfaktorer, der kan påvirke deres ydeevne. Disse faktorer kan omfatte ekstreme temperaturer, fugtighed, ætsende stoffer, slibende partikler eller endda eksponering for udendørs elementer. Designet kan omfatte beskyttende belægninger, specialmaterialer eller forbedrede tætningsmekanismer for at afbøde virkningerne af disse miljøfaktorer. Overvejelse og håndtering af de specifikke miljømæssige udfordringer hjælper med at sikre optimal ydeevne og levetid for snekkehjul i forskellige miljøer.
Ved omhyggeligt at overveje de ovennævnte designaspekter kan snekkehjul skræddersys til at fungere pålideligt og effektivt i forskellige miljøer. De designvalg, der træffes for tandprofil, materialevalg, smøring, varmeafledning, støj- og vibrationskontrol samt hensyntagen til miljøfaktorer, er afgørende for at optimere snekkehjuls ydeevne og holdbarhed i deres tilsigtede anvendelser.
Hvad er tegnene, der indikerer et behov for udskiftning eller vedligeholdelse af snekkehjul, og hvordan kan de diagnosticeres?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Overdreven slid: Overdreven slitage på snekkehjulet kan identificeres ved visuel inspektion eller måling. Tegn på slid omfatter grubetæring, ridser eller overfladeruhed på tænderne. Et slidt snekkehjul kan udvise en ændring i tandprofilen eller en reduktion i tandtykkelsen. Regelmæssige inspektioner og målinger af tandhjulets tænder kan hjælpe med at diagnosticere overdreven slitage og afgøre, om udskiftning eller vedligeholdelse er nødvendig.
- Unormal støj eller vibration: Usædvanlig støj eller vibrationer under drift kan indikere problemer med snekkehjulet. Overdreven slitage, forkert justering eller beskadigelse af tandhjulene kan forårsage uregelmæssigt gearindgreb, hvilket resulterer i støj eller vibrationer. Overvågning og analyse af støj- og vibrationsniveauer ved hjælp af sensorer og diagnostiske værktøjer kan hjælpe med at diagnosticere kilden til problemet og afgøre, om vedligeholdelse eller udskiftning af snekkehjulet er nødvendig.
- Øget modreaktion: Slør refererer til afstanden mellem tænderne på snekken og snekkehjulet. En forøgelse af sløret kan indikere slid, tandskader eller forkert justering af snekkehjulet. For stort slør kan resultere i reduceret effektivitet, nedsat positionsnøjagtighed og øget støj. Slør kan diagnosticeres ved at måle rotationssløret eller bevægelsen mellem snekken og snekkehjulet. Hvis sløret overstiger acceptable grænser, kan det indikere behov for vedligeholdelse eller udskiftning.
- Reduceret effektivitet eller ydeevne: Et fald i den samlede effektivitet eller ydeevne af det mekaniske system kan tyde på problemer med snekkehjulet. Reduceret effektivitet kan skyldes forskellige faktorer, herunder slid, forkert justering eller beskadigelse af tandhjulet. Overvågning af nøgleindikatorer for ydeevne såsom strømforbrug, hastighed eller drejningsmoment kan hjælpe med at identificere eventuelle væsentlige ændringer, der kan pege på problemer med snekkehjulet. Hvis effektiviteten eller ydeevnen falder til under acceptable niveauer, kan vedligeholdelse eller udskiftning være nødvendig.
- Lækage eller kontaminering: Lækage af smøremiddel eller tilstedeværelse af forurening omkring snekkehjulet kan indikere tætningsfejl eller beskadigelse af gearhuset. Inspicering af gearhuset for tegn på olielækage, snavs eller fremmedpartikler kan hjælpe med at diagnosticere potentielle problemer. Hvis snekkehjulet ikke er tilstrækkeligt smurt, eller hvis der er forurenende stoffer til stede, kan det føre til accelereret slid, øget friktion og reduceret gearlevetid. Det er vigtigt at adressere den grundlæggende årsag til lækagen eller forureningen, og det kan involvere vedligeholdelse eller udskiftning af snekkehjulets komponenter.
- Uregelmæssig bevægelse eller positionering: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
editor by CX 2024-04-17