China Gmrv Cast Iron 110-150 Worm Gear Box for Transmission Parts worm gearbox design

Product Description

 

Merchandise Description

Principal Resources:
one)housing:aluminium alloy ADC12(dimensions 571-090) die solid iron HT200(measurement 110-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat remedy make gear surface area hardness up to fifty six-sixty two HRC Right after precision grinding, carburization layer’s thickness in between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1

In depth Photographs

Blend Options:
Enter:with input shaft, With sq. flange,With IEC regular input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic go over
Worm reducers are available with diffferent combos: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS

Exploded See:

Solution Parameters

Outdated Model	New Model	Ratio	Center Distance	Electrical power	Enter Dia.	Output Dia.	Output Torque	Fat
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	seven.5~100	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	one.2kgs
RV040	RW040	7.5~a hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~a hundred	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	seven.5~one hundred	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	seven.5~a hundred	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	nine.0kgs
RV090	RW090	seven.5~a hundred	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	seven.5~100	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~one hundred	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		eighty four.0kgs

GMRV Outline Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	fifty four	forty four	fourteen	55	32	fifty six	63	65	29	fifty five	forty	fifty seven	30	75	forty four	six.five	21	five.five	M6*10(n=4)	0°	5	sixteen.three	27
040	100	121.five	70	60	18(19)	60	43	seventy one	seventy eight	seventy five	36.5	70	fifty	seventy one.five	forty	87	55	six.five	26	6.5	M6*10(n=4)	45°	six	twenty.8(21.8)	35
050	120	144	80	70	twenty five(24)	70	49	eighty five	92	85	forty three.5	80	sixty	84	fifty	one hundred	sixty four	eight.5	30	7	M8*12(n=4)	45°	eight	28.3(27.3)	forty
063	144	174	one hundred	85	25(28)	80	sixty seven	103	112	95	53	ninety five	72	102	63	one hundred ten	80	8.five	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	one hundred twenty	90	28(35)	ninety five	72	112	120	115	57	112.five	86	119	75	140	93	11	40	ten	M8*fourteen(n=8)	45°	8(10)	31.3(38.3)	sixty
090	206	238	140	100	35(38)	110	seventy four	a hundred thirty	140	a hundred thirty	67	129.five	103	a hundred thirty five	ninety	160	102	13	45	eleven	M10*sixteen(n=8)	45°	ten	38.3(41.3)	70
110	255	295	170	a hundred and fifteen	42	one hundred thirty	–	a hundred and forty four	155	a hundred sixty five	seventy four	one hundred sixty	127.5	167.5	a hundred and ten	200	one hundred twenty five	fourteen	50	14	M10*eighteen(n=8)	45°	12	45.3	eighty five
one hundred thirty	293	335	two hundred	120	45	180	–	one hundred fifty five	170	215	eighty one	179	146.5	187.five	one hundred thirty	250	one hundred forty	sixteen	sixty	fifteen	M12*20(n=8)	45°	fourteen	forty eight.8	100
one hundred fifty	340	four hundred	240	a hundred forty five	fifty	a hundred and eighty	–	185	200	215	96	210	a hundred and seventy	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	fifty three.8	120

Organization Profile

About CZPT Transmission:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.
Our top products is  full variety of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop units, UDL Variators and AC Motors, G3 helical equipment motor.
Products are widely employed for purposes these kinds of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, building machinery, metallurgic mine, environmental safety engineering, and all varieties of computerized strains, and assembly strains.
With rapidly supply, excellent following-income provider, sophisticated generating facility, our goods offer well  both at house and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to create and innovate on basis of high quality, and develop a good reputation for reducers.

 Packing info:Plastic Bags+Cartons+Picket Situations , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Acquire Eurasia 

Logistics

After Income Service

one.Servicing Time and Warranty:In 1 year right after obtaining goods.
2.Other Provider: Including modeling selection guide, installation guidebook, and difficulty resolution manual, etc.

FAQ

one.Q:Can you make as for every consumer drawing?
   A: Indeed, we supply personalized provider for buyers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
   A: 30% deposit prior to generation,harmony T/T prior to shipping and delivery.
3.Q:Are you a trading firm or company?
   A:We are a manufacurer with superior products and experienced workers.
4.Q:What’s your generation capability?
   A:8000-9000 PCS/Thirty day period
five.Q:Totally free sample is obtainable or not?
   A:Of course, we can offer totally free sample if customer concur to pay out for the courier cost
six.Q:Do you have any certificate?
   A:Of course, we have CE certification and SGS certificate report.

Contact information:
Ms Lingel Pan
For any concerns just feel free of charge ton get in touch with me. A lot of thanks for your variety consideration to our organization!

US $60-220 / Piece |

1 Piece (Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 60/Piece 1 Piece(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

US $60-220 / Piece |

1 Piece (Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 60/Piece 1 Piece(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Advantages and disadvantages of worm gear reducer

If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.

Hollow shaft worm gear reducer

Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer

The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer

R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.

AGKNX Electric Worm Gear Reducer

AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.

editor by czh 2022-12-08