Deskripsyon sa Produkto
SMRV series worm-gear speed reducer is a new-generation of products developed by our company with combination of advanced by technology both at home and abroad.
Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
Technical data:
(1) Motor input power:0.06kw-15kw
(2) Output torque:4-2320N.M
(3) Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4) With IEC motor input flange: 56B14/71B14/80B5/90B5
Mga Materyales:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-150: Cast iron housing
(3) Bearing: CHINAMFG bearing & Homemade bearing
(4) Lubricant: Synthetic & Mineral
(5) The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6) With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
Kolor:
(1) Blue / Light blue
(2) Silvery White
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) Every product must be tested before sending
| Gahum sa motor | Modelo | speed ratio | output speed | output toruqe |
| 0.06kw 1400rpm | NMRV030 | 5 | 280rpm | 2.0N.M |
| NMRV030 | 7.5 | 186rpm | 2.6N.M | |
| NMRV030 | 10 | 140rpm | 3.3N.M | |
| NMRV030 | 15 | 94rpm | 4.7N.M | |
| NMRV030 | 20 | 70rpm | 5.9N.M | |
| NMRV030 | 25 | 56rpm | 6.8N.M | |
| NMRV030 | 30 | 47rpm | 7.9N.M | |
| NMRV030 | 40 | 35rpm | 9.7N.M | |
| NMRV030 | 50 | 28rpm | 11.0N.M | |
| NMRV030 | 60 | 24rpm | 12.0N.M | |
| NMRV030 | 80 | 18rpm | 14.0N.M | |
| 0.09kw 1400rpm | NMRV030 | 5 | 280rpm | 2.7N.M |
| NMRV030 | 7.5 | 186rpm | 3.9N.M | |
| NMRV030 | 10 | 140rpm | 5.0N.M | |
| NMRV030 | 15 | 94rpm | 7.0N.M | |
| NMRV030 | 20 | 70rpm | 8.8N.M | |
| NMRV030 | 25 | 56rpm | 10.0N.M | |
| NMRV030 | 30 | 47rpm | 12.0N.M | |
| NMRV030 | 40 | 35rpm | 14.0N.M | |
| NMRV030 | 50 | 28rpm | 17.0N.M | |
| NMRV030 | 60 | 24rpm | 18.0N.M | |
| 0.12kw 1400rpm | NMRV030 | 5 | 280rpm | 3.6N.M |
| NMRV030 | 7.5 | 186rpm | 5.2N.M | |
| NMRV030 | 10 | 140rpm | 6.6N.M | |
| NMRV030 | 15 | 94rpm | 9.3N.M | |
| NMRV030 | 20 | 70rpm | 12.0N.M | |
| NMRV030 | 25 | 56rpm | 14.0N.M | |
| NMRV030 | 30 | 47rpm | 16.0N.M | |
| NMRV030 | 40 | 35rpm | 19.0N.M | |
| NMRV030 | 50 | 28rpm | 22.0N.M | |
| 0.18kw 1400rpm | NMRV030 | 5 | 280rpm | 5.3N.M |
| NMRV030 | 7.5 | 186rpm | 7.7N.M | |
| NMRV030 | 10 | 140rpm | 10.0N.M | |
| NMRV030 | 15 | 94rpm | 14.0N.M | |
| NMRV030 | 20 | 70rpm | 18.0N.M | |
| NMRV030 | 25 | 56rpm | 20.0N.M | |
| NMRV030 | 30 | 47rpm | 24.0N.M |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aplikasyon: | Industriya |
|---|---|
| Katig-a: | Hardened |
| Matang: | Worm and Wormwheel |
| Output Speed: | 14-280rpm |
| Input Speed: | 1400rpm |
| Ouput Torque: | 2.6-1195n.M |
| Pag-customize: | Anaa |
|
|---|
Can you explain the impact of worm wheels on the overall efficiency of gearing systems?
Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:
- Pagkunhod sa Gamit: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
- Inherent Efficiency Loss: Worm gears inherently introduce some efficiency loss due to the sliding action that occurs between the worm and the worm wheel. This sliding action generates friction, which results in energy losses and heat generation. Compared to other types of gears, such as spur gears or helical gears, worm gears typically have lower efficiency levels.
- Self-Locking Property: One unique characteristic of worm wheels is their self-locking property. When the worm wheel is not being actively driven, the friction generated between the worm and the worm wheel prevents the worm wheel from rotating backward. This self-locking feature provides stability and prevents the system from backdriving. However, it also contributes to the overall efficiency loss of the gearing system.
- Lubrication and Friction: Proper lubrication of worm wheels is crucial for reducing friction and improving their efficiency. Lubrication forms a thin film between the worm and the worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher energy losses, and reduced efficiency. Therefore, maintaining appropriate lubrication levels is essential for optimizing the efficiency of worm gear systems.
- Design Factors: Several design factors can impact the efficiency of worm wheels. These include the tooth profile, helix angle, material selection, and manufacturing tolerances. The tooth profile and helix angle can influence the contact pattern and the distribution of loads, affecting efficiency. The choice of materials with low friction coefficients and good wear resistance can help improve efficiency. Additionally, maintaining tight manufacturing tolerances ensures proper meshing and reduces energy losses due to misalignment or backlash.
- Mga Kondisyon sa Operasyon: The operating conditions, such as the applied load, speed, and temperature, can also affect the efficiency of worm wheels. Higher loads and speeds can lead to increased friction and energy losses, reducing efficiency. Elevated temperatures can cause lubricant degradation, increased viscosity, and higher friction, further impacting efficiency. Therefore, operating within the specified load and speed limits and maintaining suitable operating temperatures are essential for optimizing efficiency.
In summary, worm wheels have a notable impact on the overall efficiency of gearing systems. While they offer high gear reduction ratios and self-locking capabilities, they also introduce inherent efficiency losses due to friction and sliding action. Proper lubrication, suitable design considerations, and operating within specified limits are essential for maximizing the efficiency of worm gear systems.
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Profile sa Ngipin: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Pagpili sa Materyal: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Pagkontrol sa Kasaba ug Pag-uyog: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
Unsa ang mga timailhan nga nagpakita sa panginahanglan sa pag-ilis o pagmentinar sa worm wheel, ug unsaon kini pagdayagnos?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Sobra nga Pagsul-ob: Ang sobra nga pagkaguba sa worm wheel mailhan pinaagi sa biswal nga inspeksyon o pagsukod. Ang mga timailhan sa pagkaguba naglakip sa pitting, scoring, o surface roughness sa mga ngipon. Ang giguba nga worm wheel mahimong magpakita og pagbag-o sa profile sa ngipon o pagkunhod sa gibag-on sa ngipon. Ang regular nga inspeksyon ug pagsukod sa mga ngipon sa gear makatabang sa pagdayagnos sa sobra nga pagkaguba ug pagtino kung kinahanglan ba ang pag-ilis o pagmentinar.
- Dili Normal nga Kasaba o Pag-uyog: Ang dili kasagaran nga kasaba o pag-uyog atol sa operasyon mahimong magpakita sa mga problema sa worm wheel. Ang sobra nga pagkaguba, dili pag-align, o kadaot sa mga ngipon sa gear mahimong hinungdan sa dili regular nga gear meshing, nga moresulta sa kasaba o pag-uyog. Ang pagmonitor ug pag-analisar sa lebel sa kasaba ug pag-uyog gamit ang mga sensor ug mga himan sa pagdayagnos makatabang sa pagdayagnos sa tinubdan sa problema ug pagtino kung kinahanglan ba ang pagmentinar o pag-ilis sa worm wheel.
- Nadugangan nga Backlash: Ang backlash nagtumong sa gintang tali sa mga ngipon sa ulod ug sa ligid sa ulod. Ang pagtaas sa backlash mahimong magpakita sa pagkaguba, kadaot sa ngipon, o dili pag-align sa ligid sa ulod. Ang sobra nga backlash mahimong moresulta sa pagkunhod sa kahusayan, pagkunhod sa katukma sa posisyon, ug pagdugang sa kasaba. Ang backlash mahimong madayagnos pinaagi sa pagsukod sa rotational play o paglihok tali sa ulod ug sa ligid sa ulod. Kung ang backlash molapas sa madawat nga mga limitasyon, mahimo kini magpakita sa panginahanglan alang sa pagmentinar o pag-ilis.
- Nakunhoran nga Kaepektibo o Pagganap: Ang pagkunhod sa kinatibuk-ang kahusayan o performance sa mekanikal nga sistema mahimong magpasabot og mga problema sa worm wheel. Ang pagkunhod sa kahusayan mahimong tungod sa nagkalain-laing mga hinungdan, lakip na ang pagkaguba, dili pag-align, o kadaot sa mga ngipon sa gear. Ang pagmonitor sa mga importanteng performance indicator sama sa konsumo sa kuryente, katulin, o torque makatabang sa pag-ila sa bisan unsang mahinungdanong mga pagbag-o nga mahimong magtudlo sa mga problema sa worm wheel. Kung ang kahusayan o performance moubos sa madawat nga lebel, ang pagmentinar o pag-ilis mahimong gikinahanglan.
- Pagtulo o Kontaminasyon: Ang pagtulo sa lubricant o ang presensya sa kontaminasyon sa palibot sa worm wheel mahimong magpakita sa pagkapakyas sa seal o kadaot sa gear housing. Ang pag-inspeksyon sa gear housing alang sa mga timailhan sa pagtulo sa lana, mga debris, o mga langyaw nga partikulo makatabang sa pagdayagnos sa mga potensyal nga problema. Kung ang worm wheel wala ma-lubricate og maayo o kung adunay mga kontaminante, mahimo kini nga mosangpot sa mas paspas nga pagkaguba, dugang nga friction, ug pagkunhod sa kinabuhi sa gear. Ang pagsulbad sa hinungdan sa pagtulo o kontaminasyon hinungdanon, ug mahimo kini maglakip sa pagmentinar o pag-ilis sa mga sangkap sa worm wheel.
- Dili Regular nga Paglihok o Posisyon: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
editor by CX 2024-04-17