China 90 Degree Worm Gear Reducer Transmission Gearbox for Conveyor System worm gearbox components

Opis robe

Primary Components:
one)housing:aluminium alloy ADC12(measurement 571-090) die cast iron HT200(measurement a hundred and ten-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth therapy make equipment surface hardness up to 56-62 HRC Right after precision grinding, carburization layer’s thickness among .3-.5mm.
3) Pužni točak: nosiva legura kalaja CuSn10-1

Detaljne fotografije

Mixture Choices:
Ulaz: sa ulaznom osovinom, sa kvadratnom prirubnicom, sa IEC normalnom ulaznom prirubnicom
Output:with torque arm, output flange, one output shaft, double output shaft, plastic go over
Worm reducers are accessible with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Computer, NMRV+UDL, NMRV+MOTORS

Rastavljeni prikaz:

Parametri stavke

Stari model	Novi model	Omjer	Udaljenost od centra	Energija	Ulazi Dia.	Izlazni dijametar	Izlazni obrtni moment	Tjelesna težina
RV571		7.5~100	25mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7,5 ~ stotinu	30mm	0,06 kW ~ 0,25 kW	Φ9(Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	sedam,5 ~ sto	40mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 Nm	dva,3 kg
RV050	RW050	sedam,5 ~ sto	50mm	0,12 kW ~ 1,5 kW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 Nm	3,5 kg
RV063	RW063	7,5 ~ sto	63 mm	0,18 kW ~ 2,2 kW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 Nm	6,2 kg
RV075	RW075	sedam,5~100	75mm	0,25 kW ~ 4,0 kW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 Nm	devet,0 kg
RV090	RW090	7,5 ~ sto	90mm	0,37 kW ~ 4,0 kW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 Nm	trinaest,0 kg
RV110	RW110	7,5 ~ stotinu	110 mm	0,55 kW ~ 7,5 kW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	sedam,5 ~ sto	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28,Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7,5 ~ sto	150 mm	2,2 kW ~ 15 kW	Φ28(Φ38,Φ42)	Φ50		osamdeset četiri,0 kg

GMRV Definiši dimenziju:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	Ja	M	S	O	P	P	R	S	T	Bloodstone	β	b	t	V
030	osamdeset	devedeset sedam	pedeset četiri	44	četrnaest	55	32	56	šezdeset tri	šezdeset pet	29	55	40	57	trideset	75	44	šest,5	21	5.5	M6*deset(n=4)	0°	5	sixteen.3	27
040	100	121.5	70	60	18(19)	60	43	sedamdeset i jedan	78	75	36.5	70	pedeset	sedamdeset jedan,5	40	87	pedeset pet	6.5	26	6. pet	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	sto četrdeset četiri	osamdeset	70	25(24)	70	49	85	devedeset dva	osamdeset pet	forty three.five	osamdeset	60	84	pedeset	sto	šezdeset četiri	osam i pet	30	7	M8*12(n=4)	45°	8	28.3(27.3)	četrdeset
063	144	174	100	85	25(28)	osamdeset	šezdeset sedam	103	112	devedeset pet	fifty three	devedeset pet	sedamdeset i dva	102	63	110	80	8. pet	36	8	M8*12(n=8)	45°	osam	28.3(31.3)	pedeset
075	172	205	sto dvadeset	90	28(35)	devedeset pet	sedamdeset i dva	112	sto dvadeset	one hundred fifteen	pedeset sedam	112.5	86	119	sedamdeset pet	140	devedeset tri	jedanaest	četrdeset	10	M8*četrnaest(n=8)	45°	8(ten)	31.3(38.3)	šezdeset
090	206	238	140	stotinu	35(38)	sto deset	sedamdeset četiri	130	sto četrdeset	130	šezdeset sedam	129.5	103	135	90	sto šezdeset	102	13	četrdeset pet	11	M10*sixteen(n=8)	45°	deset	38.3(41.3)	70
110	255	295	sto sedamdeset	one hundred fifteen	42	130	–	sto četrdeset četiri	sto pedeset pet	a hundred sixty five	74	160	127. pet	167.5	110	dvjesto	125	14	pedeset	četrnaest	M10*18(n=8)	45°	12	četrdeset pet i tri	osamdeset pet
sto trideset	293	335	dvjesto	sto dvadeset	45	sto osamdeset	–	sto pedeset pet	170	215	81	179	146.five	187. pet	sto trideset	250	sto četrdeset	šesnaest	60	petnaest	M12*20(n=8)	45°	14	četrdeset osam,8	100
sto pedeset	340	četiri stotine	240	145	50	180	–	185	dvjesto	215	ninety six	210	sto sedamdeset	230	sto pedeset	250	sto osamdeset	18	72.five	osamnaest	M12*22(n=8)	45°	14	53.eight	120

Profil kompanije

O CZPT Transmisiji:
We are a professional reducer company positioned in HangZhou, ZHangZhoug province.
Our top items is full assortment of RV571-a hundred and fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop units, UDL Variators and AC Motors, G3 helical equipment motor.
Merchandise are commonly employed for programs this sort of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-making, development equipment, metallurgic mine, environmental protection engineering, and all varieties of automatic lines, and assembly lines.
With quick delivery, excellent right after-revenue services, sophisticated creating facility, our merchandise offer well both at home and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our intention is to create and innovate on basis of substantial top quality, and generate a good reputation for reducers.

Packing info:Plastic Bags+Cartons+Wood Situations , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Get Eurasia

Logistika

After Product sales Service

1. Vrijeme servisiranja i garancija:Inside of 1 year soon after acquiring goods.
2. Drugi pružatelj usluga: Such as modeling selection information, installation guide, and difficulty resolution information, etc.

Često postavljana pitanja

1.Q:Can you make as for each buyer drawing?
A: Yes, we offer customized service for clients appropriately. We can use customer’s nameplate for gearboxes.
2. P: Koje su vaše fraze plaćanja?
   A: thirty% deposit ahead of manufacturing,stability T/T prior to supply.
3.Q:Are you a trading business or manufacturer?
   A:We are a manufacurer with sophisticated gear and seasoned personnel.
four.Q:What’s your generation capability?
   A: 8000-9000 KOM/Mjesečno
5. P: Da li je dostupan besplatan uzorak ili ne?
   A:Yes, we can provide free sample if customer concur to pay out for the courier value
6. P: Imate li neku certifikaciju?
   A:Indeed, we have CE certificate and SGS certificate report.

Contact data:
Gospođa Lingel Pan
For any queries just feel free of charge ton speak to me. Several thanks for your sort focus to our firm!

US $12-220
/ Komad
| 1 komad

(Minimalna narudžba)

###

Primjena:	Motori, Mašine, Pomorski strojevi, Poljoprivredne mašine, Industrija
Funkcija:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Raspored:	Pravi ugao
Tvrdoća:	Očvrsnuta površina zuba
Instalacija:	Horizontalni tip
Korak:	Dvostruki korak

###

Uzorci:	US$ 12/Piece 1 komad (minimalna narudžba) \| Zatraži uzorak

###

Prilagođavanje:	Dostupno \| Prilagođeni zahtjev

###

Stari model	Novi model	Omjer	Udaljenost od centra	Moć	Ulazni dijametar	Izlazni dijametar	Izlazni obrtni moment	Težina
RV025		7.5~100	25mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7.5~100	30mm	0,06 kW ~ 0,25 kW	Φ9(Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	7.5~100	40mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 Nm	2,3 kg
RV050	RW050	7.5~100	50mm	0,12 kW ~ 1,5 kW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 Nm	6,2 kg
RV075	RW075	7.5~100	75mm	0,25 kW ~ 4,0 kW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 Nm	9,0 kg
RV090	RW090	7.5~100	90mm	0,37 kW ~ 4,0 kW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 Nm	13,0 kg
RV110	RW110	7.5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28,Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7.5~100	150 mm	2,2 kW ~ 15 kW	Φ28(Φ38,Φ42)	Φ50		84,0 kg

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	Ja	M	S	O	P	P	R	S	T	Bloodstone	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

US $12-220
/ Komad
| 1 komad

(Minimalna narudžba)

###

Primjena:	Motori, Mašine, Pomorski strojevi, Poljoprivredne mašine, Industrija
Funkcija:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Raspored:	Pravi ugao
Tvrdoća:	Očvrsnuta površina zuba
Instalacija:	Horizontalni tip
Korak:	Dvostruki korak

###

Uzorci:	US$ 12/Piece 1 komad (minimalna narudžba) \| Zatraži uzorak

###

Prilagođavanje:	Dostupno \| Prilagođeni zahtjev

###

Stari model	Novi model	Omjer	Udaljenost od centra	Moć	Ulazni dijametar	Izlazni dijametar	Izlazni obrtni moment	Težina
RV025		7.5~100	25mm	0,06 kW ~ 0,12 kW	Φ9	Φ11	21 Nm	0,7 kg
RV030	RW030	7.5~100	30mm	0,06 kW ~ 0,25 kW	Φ9(Φ11)	Φ14	45 Nm	1,2 kg
RV040	RW040	7.5~100	40mm	0,09 kW ~ 0,55 kW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 Nm	2,3 kg
RV050	RW050	7.5~100	50mm	0,12 kW ~ 1,5 kW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 Nm	3,5 kg
RV063	RW063	7.5~100	63 mm	0,18 kW ~ 2,2 kW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 Nm	6,2 kg
RV075	RW075	7.5~100	75mm	0,25 kW ~ 4,0 kW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 Nm	9,0 kg
RV090	RW090	7.5~100	90mm	0,37 kW ~ 4,0 kW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 Nm	13,0 kg
RV110	RW110	7.5~100	110 mm	0,55 kW ~ 7,5 kW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 Nm	35,0 kg
RV130	RW130	7.5~100	130 mm	0,75 kW ~ 7,5 kW	Φ24(Φ28,Φ38)	Φ45	1550 Nm	48,0 kg
RV150	RW150	7.5~100	150 mm	2,2 kW ~ 15 kW	Φ28(Φ38,Φ42)	Φ50		84,0 kg

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	Ja	M	S	O	P	P	R	S	T	Bloodstone	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

editor by czh 2023-02-03

epizoda