{"id":1364,"date":"2026-06-26T06:20:27","date_gmt":"2026-06-26T06:20:27","guid":{"rendered":"https:\/\/worm-and-worm-wheel.com\/?p=1364"},"modified":"2026-06-26T06:20:27","modified_gmt":"2026-06-26T06:20:27","slug":"worm-and-worm-wheel-for-wastewater-treatment-mixers-and-scrapers","status":"publish","type":"post","link":"https:\/\/worm-and-worm-wheel.com\/ar\/worm-and-worm-wheel-for-wastewater-treatment-mixers-and-scrapers\/","title":{"rendered":"\u062f\u0648\u062f\u0629 \u0648\u0639\u062c\u0644\u0629 \u062f\u0648\u062f\u0629 \u0644\u062e\u0644\u0627\u0637\u0627\u062a \u0648\u0643\u0627\u0634\u0637\u0627\u062a \u0645\u0639\u0627\u0644\u062c\u0629 \u0645\u064a\u0627\u0647 \u0627\u0644\u0635\u0631\u0641 \u0627\u0644\u0635\u062d\u064a"},"content":{"rendered":"
\n

<\/p>\n

\n

Korea Ever-Power \u00b7 Application Engineering Guide<\/p>\n

\u062f\u0648\u062f\u0629 \u0648\u0639\u062c\u0644\u0629 \u062f\u0648\u062f\u0629 \u0644\u062e\u0644\u0627\u0637\u0627\u062a \u0648\u0643\u0627\u0634\u0637\u0627\u062a \u0645\u0639\u0627\u0644\u062c\u0629 \u0645\u064a\u0627\u0647 \u0627\u0644\u0635\u0631\u0641 \u0627\u0644\u0635\u062d\u064a<\/h1>\n

A municipal wastewater treatment plant processes sewage 24 hours a day in an atmosphere saturated with hydrogen sulphide at 20 to 80 ppm. The clarifier scraper drive \u2014 a worm gear pair turning at 0.05 RPM on an outdoor concrete deck \u2014 sits in this corrosive atmosphere continuously for 15 to 25 years. Standard industrial steel and bronze corrode visibly within 12 months. The H\u2082S concentration determines which material survives.<\/p>\n

Talk to a wastewater drive engineer \u2192<\/a><\/p>\n<\/div>\n

<\/p>\n

\n
\u0625\u062c\u0627\u0628\u0629 \u0633\u0631\u064a\u0639\u0629<\/div>\n

Wastewater treatment plants use worm gear pairs for clarifier scrapers, sludge thickeners, aeration mixers, and flocculation paddle drives \u2014 all of which require ultra-low output speed (0.02 to 2 RPM), high torque (500 to 10,000+ N\u00b7m), and continuous outdoor operation in a hydrogen sulphide (H\u2082S) atmosphere. The H\u2082S material decision tree classifies the exposure into four concentration bands and maps each to the required worm material, wheel alloy, housing coating, and seal specification. At below 5 ppm H\u2082S, standard zinc-plated steel and phosphor bronze survive 10+ years. At 50 to 200 ppm, only 316L stainless with aluminium bronze and full epoxy encapsulation provides acceptable service life. Ultra-low speed operation at 0.02 to 0.1 RPM for clarifier scrapers requires total gear ratios of 1,000:1 to 5,000:1 \u2014 achieved by combining a worm gear pair (40:1 to 80:1) with a secondary spur or planetary stage (25:1 to 80:1), because single-stage worm ratios above 100:1 are impractical.<\/p>\n<\/div>\n

<\/p>\n

Why wastewater treatment equipment uses worm gear drives<\/h2>\n
\n
\n

Wastewater treatment processes require extremely slow, high-torque rotation. A primary clarifier scraper rotates a 30-metre-diameter bridge at 0.03 to 0.05 RPM \u2014 one full revolution every 20 to 33 minutes. A sludge thickener turns a rake at 0.1 to 0.5 RPM. An aeration basin mixer turns a propeller at 20 to 60 RPM \u2014 faster, but still far below typical motor output speed.<\/p>\n

The worm gear pair provides the high single-stage ratio needed to bridge the speed gap between the motor (1,450 RPM) and the process (0.03 to 60 RPM), while the self-locking property prevents the scraper arm from drifting under sludge drag when the motor stops for maintenance or power interruption.<\/p>\n<\/div>\n

\"worm<\/div>\n<\/div>\n
\n
\n
Ultra-high ratio in compact form<\/div>\n

A worm gear pair at 60:1 combined with a spur reduction at 50:1 produces a total ratio of 3,000:1 in a drive package that fits on a clarifier bridge \u2014 converting 1,450 RPM motor speed to 0.48 RPM scraper rotation without requiring a separate gearbox tower.<\/p>\n<\/div>\n

\n
Sludge drag holding<\/div>\n

Clarifier scrapers and thickener rakes experience continuous drag torque from settled sludge. When the motor stops, the sludge drag would rotate the scraper backward if the drive were not self-locking \u2014 potentially tangling the scraper chains in multi-arm clarifiers.<\/p>\n<\/div>\n

\n
24\/7 outdoor continuous duty<\/div>\n

Treatment processes run continuously. The worm gear pair operates 8,760 hours per year \u2014 among the longest annual operating hours of any application in this 30-article series. Oil-bath lubrication with temperature-compensated oil changes is standard for this duty.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

H\u2082S corrosive atmosphere decision tree \u2014 from concentration to material specification<\/h2>\n

Hydrogen sulphide (H\u2082S) is the signature corrosive gas in wastewater treatment environments. It is produced by anaerobic decomposition of organic matter \u2014 particularly in headworks, primary clarifiers, sludge holding tanks, and covered digesters. The H\u2082S concentration varies widely within a single WWTP: the headworks screening area may see 50 to 200 ppm, while the secondary clarifier deck may see only 5 to 15 ppm. The worm gear pair material must match the local H\u2082S concentration at its installation point \u2014 not the plant average.<\/p>\n

\n\n\n\n\n\n\n\n\n
H\u2082S band<\/th>\nTypical WWTP location<\/th>\nWorm material<\/th>\nWheel alloy<\/th>\nHousing protection<\/th>\nExpected life<\/th>\n<\/tr>\n<\/thead>\n
Below 5 ppm (mild)<\/td>\nSecondary clarifier deck, effluent channel<\/td>\nHot-dip galvanised steel<\/td>\nPhosphor bronze CuSn12Ni<\/td>\nEpoxy paint, standard seals<\/td>\n10 \u2013 15 years<\/td>\n<\/tr>\n
5 \u2013 25 ppm (moderate)<\/td>\nPrimary clarifier, aeration basin inlet<\/td>\n304 stainless steel<\/td>\nAluminium bronze CuAl10Fe5Ni5<\/td>\nHigh-build epoxy, PTFE seals<\/td>\n8 \u2013 12 years<\/td>\n<\/tr>\n
25 \u2013 100 ppm (high)<\/td>\nHeadworks, covered primary, sludge thickener<\/td>\n316L stainless steel<\/td>\nAluminium bronze CuAl10Fe5Ni5<\/td>\nCoal-tar epoxy or vinyl ester, FKM seals<\/td>\n6 \u2013 10 years<\/td>\n<\/tr>\n
Above 100 ppm (severe)<\/td>\nCovered digester, enclosed sludge handling<\/td>\n316L or 2205 duplex SS<\/td>\nNAB nickel aluminium bronze<\/td>\nFull epoxy encapsulation, pressurised housing<\/td>\n5 \u2013 8 years<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

How H\u2082S damages the gear pair.<\/strong> H\u2082S dissolves in the moisture film on metal surfaces and forms sulphuric acid (in the presence of oxygen and water). This acid attacks both the steel worm and the bronze wheel \u2014 but by different mechanisms. On steel, the acid produces pitting corrosion that roughens the thread surface and increases friction. On standard phosphor bronze (CuSn12Ni), the H\u2082S reacts with copper to form copper sulphide (Cu\u2082S) \u2014 a black tarnish layer that grows continuously, consuming the bronze surface at 0.05 to 0.3 mm per year depending on H\u2082S concentration. Aluminium bronze (CuAl10Fe5Ni5) resists sulphide attack because the aluminium oxide surface layer is stable in H\u2082S atmospheres \u2014 which is why aluminium bronze replaces phosphor bronze at H\u2082S concentrations above 5 ppm.<\/p>\n

<\/p>\n

Ultra-low speed operation \u2014 0.02 to 2 RPM for clarifier scrapers<\/h2>\n

\"worm<\/p>\n

Clarifier scrapers operate at output speeds so low that the rotation is barely perceptible to the eye \u2014 0.03 to 0.05 RPM for a primary clarifier bridge means the tip of the scraper arm travels at roughly 5 to 8 metres per minute across the basin surface. This ultra-low speed requires total gear ratios of 1,000:1 to 5,000:1 between the motor and the scraper drive shaft.<\/p>\n

Why single-stage worm gear pairs cannot reach these ratios.<\/strong> A single-start worm gear pair at module 3 and q = 10 has a ratio of approximately 40:1. Increasing the ratio to 100:1 within a single stage requires either an impractically large wheel (diameter grows proportionally) or an impractically small worm pitch diameter (reducing strength). Ratios above 100:1 in a single worm gear stage are theoretically possible but produce pairs with unusable geometry \u2014 the worm diameter becomes too thin for the torque, and the wheel becomes too large for the housing. The practical solution is a compound drive: worm gear pair first stage (40:1 to 80:1) plus a secondary spur, helical, or planetary stage (25:1 to 80:1). Common compounds for clarifier drives: worm 60:1 + spur 50:1 = 3,000:1 total, or worm 50:1 + planetary 40:1 = 2,000:1 total.<\/p>\n

Lubrication at ultra-low speed.<\/strong> At 0.03 to 0.05 RPM output, the worm input shaft rotates at 50 to 250 RPM (depending on the worm stage ratio within the compound drive). This input speed is sufficient to maintain a hydrodynamic oil film on the worm thread \u2014 unlike some ultra-low-speed applications where boundary lubrication dominates. Oil-bath lubrication is standard for WWTP worm gear drives because the continuous 24\/7 duty produces sustained heat generation that sealed grease cannot dissipate over the multi-year service intervals typical of water treatment equipment.<\/p>\n

<\/p>\n

\n
\u0645\u0644\u0627\u062d\u0638\u0629 \u0645\u0643\u062a\u0628\u064a\u0629 \u0647\u0646\u062f\u0633\u064a\u0629<\/div>\n

A Korean municipal WWTP serving 200,000 population specified worm gear pairs for 4 primary clarifier scraper drives. The clarifiers were open-air circular type, 30 m diameter, with centre-feed peripheral-overflow design. The H\u2082S concentration was measured at 15 to 25 ppm at the clarifier deck level \u2014 moderate exposure. The initial specification used standard galvanised steel worms with phosphor bronze wheels \u2014 appropriate for below-5-ppm exposure but under-specified for the actual 15 to 25 ppm environment. After 4 years, two of the four worm gear pairs developed severe sulphide tarnishing on the bronze wheel surfaces \u2014 tooth thickness had reduced by 0.18 mm (roughly 12 percent of original) and backlash had increased by a factor of 2.5. The remaining two pairs (on the upwind side of the plant, receiving lower H\u2082S concentration from prevailing wind) showed only mild tarnishing. Replacement specification for all four: 304 stainless worm, aluminium bronze CuAl10Fe5Ni5 wheel, high-build epoxy housing coating. Cost increase per pair: 420 USD (from 680 USD to 1,100 USD). Post-replacement inspection at Year 3: all four pairs showed negligible sulphide attack \u2014 aluminium bronze surface clean and stable. Lesson: the H\u2082S concentration must be measured at the actual installation point, not estimated from the plant type. Two clarifiers in the same plant can experience different H\u2082S levels depending on prevailing wind, cover status, and proximity to headworks.<\/p>\n<\/div>\n

<\/p>\n

Outdoor continuous duty \u2014 condensation, temperature cycling, and biofilm<\/h2>\n
\n
\"worm<\/div>\n
\n

WWTP worm gear drives operate outdoors on clarifier bridges, basin decks, and thickener platforms \u2014 exposed to rain, sun, wind, and the H\u2082S atmosphere continuously. Three environmental factors beyond H\u2082S affect the gear pair housing and seals.<\/p>\n

Managing these factors through housing design, seal specification, and maintenance scheduling extends the service life of the worm gear pair from the H\u2082S-limited expectation (5 to 15 years) to the full mechanical wear life (15 to 25 years).<\/p>\n<\/div>\n<\/div>\n

\n
\n
Condensation<\/div>\n

Daily temperature cycling (day-night, seasonal) produces condensation inside the gear housing \u2014 water that emulsifies oil and accelerates internal corrosion. Breather valves with desiccant cartridges equalise pressure while blocking moisture. Replace desiccant every 6 months. For critical drives, install a low-wattage heater cartridge (5-10 W) that maintains housing temperature 5\u00b0C above ambient dew point.<\/p>\n<\/div>\n

\n
UV and rain degradation<\/div>\n

UV radiation degrades standard nitrile and NBR seals within 2 to 3 years (cracking, embrittlement). EPDM seals resist UV for 5 to 8 years; FKM (Viton) for 10+ years. Rain-driven water ingress through degraded seals introduces moisture and dissolved H\u2082S into the oil \u2014 accelerating internal corrosion even when the external housing coating is intact.<\/p>\n<\/div>\n

\n
Biofilm and algae<\/div>\n

The warm, humid, nutrient-rich WWTP atmosphere promotes biofilm and algae growth on gear housing surfaces. Biofilm traps moisture against the housing, accelerating paint degradation beneath. Annual power-washing of housing exteriors removes biofilm and allows visual inspection of the coating condition. Specify anti-microbial paint additive for housings in tropical WWTP installations.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Three wastewater treatment worm gear pair specification cases<\/h2>\n

\"corrosion<\/p>\n

Case 1 \u2014 Korean municipal WWTP: 30 m clarifier scraper, 0.04 RPM, moderate H\u2082S<\/h3>\n

A Korean municipal WWTP serving 200,000 population specified worm gear pairs for 4 primary clarifier scraper drives. Clarifier diameter: 30 m. Scraper type: centre-pivot rotating bridge with 4 scraper arms. Output speed: 0.04 RPM (one revolution per 25 minutes). Output torque at the centre-pivot shaft: 6,500 N\u00b7m (sludge drag at maximum blanket depth). H\u2082S at clarifier deck: 15 to 25 ppm (moderate band). Compound drive: worm gear pair 60:1 + spur reduction 60:1 = 3,600:1 total. Motor: 3 kW, 1,450 RPM. Worm gear pair (corrected specification): single-start, module 5, centre distance 125 mm, rated 2,200 N\u00b7m (the spur stage carries the remaining ratio). Material: 304 stainless worm, aluminium bronze CuAl10Fe5Ni5 wheel. Oil-bath lubrication with ISO VG 460 synthetic PAG (H\u2082S-resistant additive package). Housing: high-build epoxy coating (dry film 250 \u00b5m minimum). Seal: FKM (Viton) IP66 with desiccant breather. Oil change: every 2 years based on acid number monitoring. Cost per worm gear pair: 1,100 USD. Service life target: 12 years.<\/p>\n

Case 2 \u2014 Japanese industrial WWTP: sludge thickener, 0.3 RPM, high H\u2082S near digester<\/h3>\n

A Japanese chemical company specified worm gear pairs for 2 gravity belt thickener drives at their on-site industrial wastewater treatment facility. The thickeners were located adjacent to the anaerobic digester \u2014 H\u2082S concentration measured at 60 to 90 ppm (high band). Output speed: 0.3 RPM. Output torque: 1,800 N\u00b7m. The high H\u2082S environment demanded the full corrosion protection specification: worm gear pair at single-start, module 4, centre distance 100 mm, ratio 40:1. Material: 316L stainless worm, aluminium bronze wheel. Housing: coal-tar epoxy coating (superior H\u2082S resistance to standard epoxy). Seal: FKM with pressurised labyrinth \u2014 positive internal nitrogen pressure (0.3 bar) prevented H\u2082S ingress into the housing even when the atmosphere concentration peaked at 90 ppm during digester venting events. Oil: ISO VG 680 synthetic PAG with sulphur-scavenging additive. Cost per pair: 1,850 USD (including pressurised seal system). Service life achieved: 7 years to first wheel replacement \u2014 consistent with the 6 to 10 year expectation for 60 to 90 ppm H\u2082S. Browse corrosion resistant worm gear reducer<\/a> options for wastewater treatment and H\u2082S-atmosphere industrial applications.<\/p>\n

Case 3 \u2014 Vietnamese aquaculture pond: paddle-wheel aerator, 20 RPM, mild atmosphere<\/h3>\n

A Vietnamese shrimp farm specified worm gear pairs for 36 paddle-wheel aerators distributed across 12 aquaculture ponds. The aerators churned pond water to maintain dissolved oxygen for shrimp survival \u2014 a life-critical application where aerator failure could cause mass shrimp mortality within hours. Output speed: 20 RPM (much faster than clarifier scrapers). Output torque: 120 N\u00b7m per aerator. H\u2082S: below 3 ppm (mild \u2014 open-air ponds with good aeration). The specification was cost-driven: 36 units at the lowest material cost that met the 5-year service life target in the mild atmosphere. Worm gear pair: single-start, module 3, centre distance 63 mm, ratio 30:1. Material: hot-dip galvanised worm (adequate at below 3 ppm H\u2082S), phosphor bronze wheel. Seal: EPDM IP55 (splash zone \u2014 aerators throw water but are not submerged). Grease: standard lithium complex EP, re-greased every 6 months via grease fitting. Cost per pair: 48 USD. Cost for 36 units: 1,728 USD. The 48 USD per pair protected roughly 5,000 USD of shrimp per pond per crop cycle. Annual maintenance: 6-monthly grease, annual seal inspection, 3-yearly zinc coating inspection (re-galvanise or replace if zinc loss exceeds 50 percent of original thickness).<\/p>\n

\"ever-power<\/p>\n

\u0627\u0644\u0623\u0633\u0626\u0644\u0629 \u0627\u0644\u0634\u0627\u0626\u0639\u0629<\/h2>\n
\n
\nQ: How do I measure H\u2082S concentration at the worm gear pair installation point?<\/summary>\n

Use a portable electrochemical H\u2082S detector (cost: 200 to 500 USD) positioned at the height of the worm gear pair housing on the clarifier deck or tank platform. Measure during worst-case conditions: warm weather (H\u2082S emission increases with temperature), low wind (concentration accumulates), and peak organic loading (typically mid-afternoon in municipal WWTPs). Record the 1-hour average concentration. Repeat the measurement seasonally \u2014 H\u2082S levels can vary 3 to 5 times between winter and summer at the same location. Use the highest seasonal reading for material specification.<\/p>\n<\/details>\n

\nQ: Can standard phosphor bronze be used in any WWTP application?<\/summary>\n

Only where the H\u2082S concentration is consistently below 5 ppm \u2014 typically secondary clarifier decks, effluent channels, and filter buildings in well-ventilated plants. Above 5 ppm, sulphide tarnishing of phosphor bronze accelerates to the point where measurable tooth thickness loss occurs within 3 to 5 years. Aluminium bronze (CuAl10Fe5Ni5) is the standard upgrade for all WWTP locations above 5 ppm H\u2082S \u2014 the aluminium oxide layer resists sulphide attack that phosphor bronze cannot. The cost premium for aluminium bronze over phosphor bronze is typically 30 to 50 percent per wheel \u2014 justified for a part expected to last 10 to 15 years in a corrosive environment.<\/p>\n<\/details>\n

\nQ: What oil change interval should WWTP worm gear pairs follow?<\/summary>\n

For mild H\u2082S environments (below 5 ppm): every 3 to 4 years based on oil analysis (acid number below 2.0 mgKOH\/g, water content below 0.1 percent). For moderate environments (5 to 25 ppm): every 2 years \u2014 H\u2082S traces that penetrate the housing form sulphuric acid in the oil, raising the acid number faster than in clean atmospheres. For high environments (above 25 ppm): annual oil change regardless of analysis \u2014 the sulphur contamination load is too high to allow extended intervals. Add a desiccant breather to all WWTP worm gear housings regardless of H\u2082S level \u2014 the moisture control alone extends oil life by 30 to 50 percent.<\/p>\n<\/details>\n

\nQ: How does the torque demand change as sludge blanket depth varies?<\/summary>\n

The scraper drag torque increases roughly linearly with sludge blanket depth. A clarifier with a thin blanket (100 to 200 mm) generates low drag; the same clarifier with a thick blanket (500 to 800 mm during peak loading) generates 2 to 4 times the drag. The worm gear pair must be rated for the maximum blanket condition \u2014 which may occur only during wet-weather flow events when hydraulic loading peaks. Specifying from the average blanket depth underrates the pair by roughly 50 percent. Add a torque overload sensor (current monitoring on the motor) that alerts operators when drag torque approaches 80 percent of the rated capacity \u2014 indicating sludge blanket depth requires increased withdrawal pumping before the scraper stalls.<\/p>\n<\/details>\n

\nQ: What is the typical service life of a WWTP worm gear pair?<\/summary>\n

The service life is determined by whichever limit is reached first: corrosion (H\u2082S-driven) or mechanical wear. At below 5 ppm H\u2082S with standard materials: 10 to 15 years before corrosion-related replacement. At 25 to 100 ppm with appropriate H\u2082S-resistant materials: 6 to 10 years. Mechanical wear alone (in a zero-corrosion environment) would allow 15 to 25 years at the continuous 24\/7 duty typical of WWTP. The corrosion limit almost always arrives before the mechanical limit \u2014 which is why the H\u2082S concentration is the single most important specification input for WWTP worm gear pair procurement. Correct material selection for the actual H\u2082S level closes the gap between the corrosion life and the mechanical life, maximising the return on the higher-cost H\u2082S-resistant specification.<\/p>\n<\/details>\n<\/div>\n

<\/p>\n

Wastewater treatment worm gear pairs operate at the intersection of three demanding conditions: hydrogen sulphide corrosion (5 to 200+ ppm), ultra-low output speed (0.02 to 2 RPM requiring compound ratios of 1,000:1 to 5,000:1), and continuous 24\/7 outdoor duty (8,760 operating hours per year). The H\u2082S material decision tree maps the local atmospheric concentration at the installation point to the required worm material, wheel alloy, housing coating, and seal specification \u2014 ensuring the material cost matches the actual corrosion severity rather than defaulting to either over-specification (wasting budget) or under-specification (halving service life). Oil-bath lubrication with H\u2082S-resistant additive packages and desiccant breathers supports the multi-year oil change intervals that continuous-duty water treatment equipment demands.<\/p>\n

For water treatment equipment manufacturers and WWTP operators, our engineering desk maps the H\u2082S concentration to the correct material specification. Standard catalogue corrosion-resistant worm gear sets<\/a> cover WWTP sizes from 80 to 200 mm centre distance with galvanised, 304 SS, and 316L SS options paired with phosphor bronze and aluminium bronze wheels. Submit a wastewater drive specification with H\u2082S measurement, output speed, torque, and installation location within the plant.<\/p>\n

<\/p>\n

\n

Specifying worm gear pairs for wastewater treatment equipment?<\/h3>\n

Send H\u2082S concentration at the installation point, output speed and torque, clarifier or equipment type, and whether the drive is outdoor or enclosed. We will classify the H\u2082S band and recommend the correct material, coating, and seal package.<\/p>\n

Request a wastewater drive specification \u2192<\/a><\/p>\n<\/div>\n

\u0627\u0644\u0645\u062d\u0631\u0631: Cxm<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

Korea Ever-Power \u00b7 Application Engineering Guide Worm and Worm Wheel for Wastewater Treatment Mixers and Scrapers A municipal wastewater treatment plant processes sewage 24 hours a day in an atmosphere saturated with hydrogen sulphide at 20 to 80 ppm. The clarifier scraper drive \u2014 a worm gear pair turning at 0.05 RPM on an outdoor […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[2821],"tags":[],"class_list":["post-1364","post","type-post","status-publish","format-standard","hentry","category-worm-and-worm-wheel"],"_links":{"self":[{"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/posts\/1364","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/comments?post=1364"}],"version-history":[{"count":1,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/posts\/1364\/revisions"}],"predecessor-version":[{"id":1366,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/posts\/1364\/revisions\/1366"}],"wp:attachment":[{"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/media?parent=1364"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/categories?post=1364"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-and-worm-wheel.com\/ar\/wp-json\/wp\/v2\/tags?post=1364"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}