China Aluminum Worm Gear Wheel Reducer Drive RV Worm Gearbox compact worm gearbox

وصف المنتج

المصادر الأساسية:
1)housing:aluminium alloy ADC12(size 571-090) die cast iron HT200(dimensions a hundred and ten-one hundred fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth therapy make equipment surface hardness up to 56-62 HRC Right after precision grinding, carburization layer’s thickness among .3-.5mm.
ثلاثة) عجلة دودة: سبيكة قصدير قابلة للارتداء CuSn10-one

Detailed Photographs

Mixture Possibilities:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic go over
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS

نظرة تفصيلية على:

معايير المنتج

نموذج قديم	طراز جديد	نسبة	المسافة المركزية	طاقة	قطر الإدخال	قطر الإخراج	عزم الدوران الناتج	وزن الجسم
RV571		7.5~100	25 مم	0.06 كيلوواط ~ 0.12 كيلوواط	Φ9	Φ11	21 نيوتن متر	0.7 كجم
RV030	RW030	7.5 إلى مائة	30 مم	0.06 كيلوواط ~ 0.25 كيلوواط	Φ9(Φ11)	Φ14	45 نيوتن متر	1.2 كجم
RV040	RW040	7.5 مائة	40 مم	0.09 كيلوواط ~ 0.55 كيلوواط	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 نيوتن متر	2.3 كجم
RV050	RW050	سبعة ونصف إلى مائة	50 مم	0.12 كيلوواط ~ 1.5 كيلوواط	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 نيوتن متر	3.5 كجم
RV063	RW063	7.5~100	63 ملم	0.18 كيلوواط ~ 2.2 كيلوواط	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 نيوتن متر	6.2 كجم
RV075	RW075	7.5 مائة	75 مم	0.25 كيلوواط ~ 4.0 كيلوواط	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 نيوتن متر	تسعة كيلوغرامات
RV090	RW090	سبعة ونصف إلى مائة	90 ملم	0.37 كيلوواط ~ 4.0 كيلوواط	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 نيوتن متر	13.0 كجم
RV110	RW110	7.5 إلى مائة	110 ملم	0.55 كيلوواط ~ 7.5 كيلوواط	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 نيوتن متر	35.0 كجم
RV130	RW130	7.5 إلى 100	130 مم	0.75 كيلوواط ~ 7.5 كيلوواط	Φ24(Φ28,Φ38)	Φ45	1550 نيوتن متر	48.0 كجم
RV150	RW150	7.5 إلى 100	150 مم	2.2 كيلوواط ~ 15 كيلوواط	Φ28(Φ38,Φ42)	Φ50		84.0 كجم

أبعاد مخطط GMRV:

جي إم آر في	أ	ب	ج	ج1	D(H8)	E(h8)	F	جي	G1	ح	H1	أنا	م	شمال	يا	P	سؤال	R	S	تي	BL	β	ب	ت	V
030	ثمانون	97	أربعة وخمسون	أربعة وأربعون	14	خمسة وخمسون	32	56	63	65	29	خمسة وخمسون	أربعون	سبعة وخمسون	30	خمسة وسبعون	44	ستة.خمسة	21	5.five	M6*10(n=4)	0°	5	ستة عشر.3	27
040	مائة	121.5	70	ستون	18(19)	ستون	ثلاثة وأربعون	71	ثمانية وسبعون	خمسة وسبعون	36.5	70	خمسون	71.five	40	87	55	ستة ونصف	26	6.5	M6*ten(n=4)	45 درجة	ستة	20.8(21.8)	35
050	مائة وعشرون	مائة وأربعة وأربعون	80	70	25(24)	70	تسعة وأربعون	85	اثنان وتسعون	خمسة وثمانون	ثلاثة وأربعون.5	ثمانون	ستون	أربعة وثمانون	50	100	أربعة وستون	8.5	ثلاثون	سبعة	M8*twelve(n=4)	45 درجة	ثمانية	28.3(27.3)	أربعون
063	مائة وأربعة وأربعون	174	100	خمسة وثمانون	خمسة وعشرون (28)	80	67	103	112	95	ثلاثة وخمسون	95	اثنان وسبعون	102	ثلاثة وستون	مائة وعشرة	80	8.5	36	8	M8*12(n=8)	45 درجة	ثمانية	28.3(31.3)	50
075	172	205	مائة وعشرون	90	28(35)	خمسة وتسعون	72	112	مائة وعشرون	مائة وخمسة عشر	57	112.5	86	119	75	140	93	أحد عشر	أربعون	10	M8*fourteen(n=8)	45 درجة	8(عشرة)	31.3(38.3)	60
090	206	238	140	مائة	35(38)	مائة وعشرة	أربعة وسبعون	130	مائة وأربعون	130	سبعة وستون	129.5	103	135	90	مائة وستون	102	13	45	أحد عشر	M10*16(n=8)	45 درجة	عشرة	38.3 (واحد وأربعون.3)	70
مائة وعشرة	255	295	مائة وسبعون	مائة وخمسة عشر	42	مائة وثلاثون	–	مائة وأربعة وأربعون	مائة وخمسة وخمسون	مائة وخمسة وستون	74	مائة وستون	127.5	167.5	110	200	125	14	خمسون	أربعة عشر	M10*18(n=8)	45 درجة	اثنا عشر	45.3	خمسة وثمانون
مائة وثلاثون	293	335	200	120	45	مائة وثمانون	–	مائة وخمسة وخمسون	170	215	81	179	146.5	187.5	130	250	مائة وأربعون	16	60	15	M12*twenty(n=8)	45 درجة	14	48.8	مائة
مائة وخمسون	340	أربعمائة	240	مائة وخمسة وأربعون	خمسون	مائة وثمانون	–	185	200	215	96	210	مائة وسبعون	230	مائة وخمسون	250	مائة وثمانون	ثمانية عشر	72.5	ثمانية عشر	M12*22(n=8)	45 درجة	14	53.8	120

نبذة عن المنظمة

حول نقل CZPT:
نحن شركة متخصصة في إنتاج المخفضات، مقرنا في هانغتشو، مقاطعة هانغتشو.
Our major items is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop units, UDL Variators and AC Motors, G3 helical gear motor.
Goods are extensively used for purposes this sort of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-making, building machinery, metallurgic mine, environmental defense engineering, and all varieties of automated lines, and assembly lines.
With rapidly supply, excellent right after-product sales service, sophisticated creating facility, our products offer well both at home and abroad. We have exported our reducers to Southeast Asia, Jap Europe and Middle East and so on.Our aim is to create and innovate on basis of substantial quality, and develop a good status for reducers.

Packing data:Plastic Luggage+Cartons+Wooden Circumstances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia

الخدمات اللوجستية

Right after Income Services

one.Routine maintenance Time and Warranty:Inside of 1 12 months following getting goods.
2.Other Support: Which includes modeling selection manual, set up information, and problem resolution manual, etc.

التعليمات

1.Q:Can you make as for each consumer drawing?
A: Indeed, we provide personalized provider for consumers appropriately. We can use customer’s nameplate for gearboxes.
2. س: ما هي شروط الدفع لديكم؟
   A: thirty% deposit just before production,stability T/T before shipping.
three.Q:Are you a trading company or company?
   A:We are a manufacurer with superior equipment and experienced personnel.
four.Q:What is actually your production potential?
   أ: 8000-9000 قطعة/شهرياً
five.Q:Cost-free sample is accessible or not?
   A:Of course, we can offer free of charge sample if client concur to pay out for the courier expense
6.Q:Do you have any certificate?
   ج: نعم، لدينا شهادة CE وتقرير شهادة SGS.

Speak to information:
السيدة لينجل بان
For any questions just really feel cost-free ton get in touch with me. Several many thanks for your kind attention to our organization!

US $12-220
/ قطعة
| قطعة واحدة

(الحد الأدنى للطلب)

###

طلب:	المحركات، الآلات، البحرية، الآلات الزراعية، الصناعة
صلابة:	سطح السن المقوى
تثبيت:	النوع الأفقي
تَخطِيط:	زاوية قائمة
شكل الترس:	ترس دودي
خطوة:	خطوة مزدوجة

###

أمثلة:	US$ 12 قطعة قطعة واحدة (الحد الأدنى للطلب) \| طلب عينة

###

التخصيص:	متاح \| طلب مخصص

###

الطراز القديم	طراز جديد	نسبة	المسافة المركزية	قوة	قطر الإدخال	قطر الإخراج	عزم الدوران الناتج	وزن
RV025		7.5~100	25 مم	0.06 كيلوواط ~ 0.12 كيلوواط	Φ9	Φ11	21 نيوتن متر	0.7 كجم
RV030	RW030	7.5~100	30 مم	0.06 كيلوواط ~ 0.25 كيلوواط	Φ9(Φ11)	Φ14	45 نيوتن متر	1.2 كجم
RV040	RW040	7.5~100	40 مم	0.09 كيلوواط ~ 0.55 كيلوواط	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 نيوتن متر	2.3 كجم
RV050	RW050	7.5~100	50 مم	0.12 كيلوواط ~ 1.5 كيلوواط	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 نيوتن متر	3.5 كجم
RV063	RW063	7.5~100	63 ملم	0.18 كيلوواط ~ 2.2 كيلوواط	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 نيوتن متر	6.2 كجم
RV075	RW075	7.5~100	75 مم	0.25 كيلوواط ~ 4.0 كيلوواط	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 نيوتن متر	9.0 كجم
RV090	RW090	7.5~100	90 ملم	0.37 كيلوواط ~ 4.0 كيلوواط	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 نيوتن متر	13.0 كجم
RV110	RW110	7.5~100	110 ملم	0.55 كيلوواط ~ 7.5 كيلوواط	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 نيوتن متر	35.0 كجم
RV130	RW130	7.5~100	130 مم	0.75 كيلوواط ~ 7.5 كيلوواط	Φ24(Φ28,Φ38)	Φ45	1550 نيوتن متر	48.0 كجم
RV150	RW150	7.5~100	150 مم	2.2 كيلوواط ~ 15 كيلوواط	Φ28(Φ38,Φ42)	Φ50		84.0 كجم

###

جي إم آر في	أ	ب	ج	ج1	D(H8)	E(h8)	F	جي	G1	ح	H1	أنا	م	شمال	يا	P	سؤال	R	S	تي	BL	β	ب	ت	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45 درجة	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45 درجة	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45 درجة	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45 درجة	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45 درجة	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45 درجة	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45 درجة	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45 درجة	14	53.8	120

US $12-220
/ قطعة
| قطعة واحدة

(الحد الأدنى للطلب)

###

طلب:	المحركات، الآلات، البحرية، الآلات الزراعية، الصناعة
صلابة:	سطح السن المقوى
تثبيت:	النوع الأفقي
تَخطِيط:	زاوية قائمة
شكل الترس:	ترس دودي
خطوة:	خطوة مزدوجة

###

أمثلة:	US$ 12 قطعة قطعة واحدة (الحد الأدنى للطلب) \| طلب عينة

###

التخصيص:	متاح \| طلب مخصص

###

الطراز القديم	طراز جديد	نسبة	المسافة المركزية	قوة	قطر الإدخال	قطر الإخراج	عزم الدوران الناتج	وزن
RV025		7.5~100	25 مم	0.06 كيلوواط ~ 0.12 كيلوواط	Φ9	Φ11	21 نيوتن متر	0.7 كجم
RV030	RW030	7.5~100	30 مم	0.06 كيلوواط ~ 0.25 كيلوواط	Φ9(Φ11)	Φ14	45 نيوتن متر	1.2 كجم
RV040	RW040	7.5~100	40 مم	0.09 كيلوواط ~ 0.55 كيلوواط	Φ9(Φ11,Φ14)	Φ18(Φ19)	84 نيوتن متر	2.3 كجم
RV050	RW050	7.5~100	50 مم	0.12 كيلوواط ~ 1.5 كيلوواط	Φ11(Φ14,Φ19)	Φ25(Φ24)	160 نيوتن متر	3.5 كجم
RV063	RW063	7.5~100	63 ملم	0.18 كيلوواط ~ 2.2 كيلوواط	Φ14(Φ19,Φ24)	Φ25(Φ28)	230 نيوتن متر	6.2 كجم
RV075	RW075	7.5~100	75 مم	0.25 كيلوواط ~ 4.0 كيلوواط	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410 نيوتن متر	9.0 كجم
RV090	RW090	7.5~100	90 ملم	0.37 كيلوواط ~ 4.0 كيلوواط	Φ19(Φ24,Φ28)	Φ35(Φ38)	725 نيوتن متر	13.0 كجم
RV110	RW110	7.5~100	110 ملم	0.55 كيلوواط ~ 7.5 كيلوواط	Φ19(Φ24,Φ28,Φ38)	Φ42	1050 نيوتن متر	35.0 كجم
RV130	RW130	7.5~100	130 مم	0.75 كيلوواط ~ 7.5 كيلوواط	Φ24(Φ28,Φ38)	Φ45	1550 نيوتن متر	48.0 كجم
RV150	RW150	7.5~100	150 مم	2.2 كيلوواط ~ 15 كيلوواط	Φ28(Φ38,Φ42)	Φ50		84.0 كجم

###

جي إم آر في	أ	ب	ج	ج1	D(H8)	E(h8)	F	جي	G1	ح	H1	أنا	م	شمال	يا	P	سؤال	R	S	تي	BL	β	ب	ت	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45 درجة	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45 درجة	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45 درجة	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45 درجة	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45 درجة	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45 درجة	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45 درجة	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45 درجة	14	53.8	120

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

editor by czh 2022-12-09